Product overview
The iFlight BLITZ Whoop F7 AIO is an all-in-one flight controller built with BGA chipsets and MOSFETs. Its separated flight control board minimizes electrical gyro noise, and the FC PCB can be detached from the ESC PCB for repair. The flight controller measures 35*35mm and weighs 10.5g, with a 25.5*25.5mm mounting pattern and φ3mm holes. Its electronics include a 216MHz BGA-STM32F745 MCU, an ICM42688 gyro, a DPS310 barometer and 16MB of onboard blackbox flash.
Input power supports 2-6S batteries, including LIHV types. The ESC uses a BB21 MCU and FD6288 driver, with 55A output current and a 65A peak for 10 seconds. Connections include Micro-USB and a pass-through DJI O3 and Caddx Vista/Polar connector. The controller supports WS2812 LED strips, a buzzer and Smartaudio / IRC Tramp VTX protocols. Bidirectional DShot requires Bluejay firmware; the ESC has no BEC or telemetry. The product is for recreational use only and does not support autonomous flight.
The package supplies one BLITZ F7 AIO and two 470uF/35V capacitors. Included wiring comprises one XT30U male 18AWG cable measuring 70mm, one 1.0-7P cable measuring 50mm-28mm and one 50mm 1.0-7P cable. Mounting accessories comprise four M2 silicon grommets, eight M2*12mm screws and eight M2 transparent nylon nuts. Ten pieces of 0.8mm black heat shrink tubing, each 10mm long, complete the supplied accessories.
