Product overview
The iFlight AOS HS5 Frame Kit is designed for high-speed FPV builds, with aerodynamic shells optimized using CFD tools to reduce drag. Tail fins add aerodynamic stability for smooth footage, while propeller spinners reduce motor drag. The front shell houses the camera, VTX, receiver, antennas and electronics stack. At typical high-speed camera uptilt, the frame provides a 155° field of view without propellers in view. Camera uptilt can extend to 90 degrees for ultra high speed runs, and O3 Camera ND filters are supported.
The 233mm-wheelbase frame weighs 226g and combines 6mm arms, a 2mm top plate and a 6mm bottom plate. It supports propellers up to 6 inches, 19–20 mm cameras and up to 1800mAh 6S batteries measuring 90 x 40 x 55 mm. A twist-lock rear shell contains only the battery for pack changes without disturbing the electronics; cutouts provide USB access and ESC cooling. Compatible video systems include the BLITZ Whoop 1.6W VTX, DJI O3 Air Unit HD and DJI O4 Pro Air Unit.
The kit includes one AOS HS5 3D Printed Kit, one top plate, one bottom plate, one screw bag and two battery pads. Maximum flight stack height and maximum VTX height are each 30mm, with 30*30/Φ3mm mounting for both. APC 5.25-inch propellers and 2808 1950KV motors are recommended. Due to manufacturing processes, product thickness may have a standard manufacturing tolerance of ±0.2mm. Hole size may have a standard manufacturing tolerance of ±0.1mm.
