ChinaDrone.Request a quote ↗
COMPONENT

WES 6S1P 1300mAh 120C FPV Racing LIPO Battery

By Huizhou WES New Energy Co., Ltd ↗

The WES New Energy WES 6S1P 1300mAh 120C FPV Racing LIPO Battery is a six-cell power pack for 5-inch freestyle and acro drones. It provides 22.2V nominal voltage, 1300mAh capacity and 120C continuous discharge through an XT60 main connection. Conflicting weight and dimension specifications leave its exact installation envelope unresolved.

Request a quote ↗
WES 6S1P 1300mAh 120C FPV Racing LIPO Battery with red and black leads and a yellow connector
WES 6S1P 1300mAh 120C FPV Racing LIPO Battery with red and black leads and a yellow connector
Product seriesWES Ultra-High Discharge Rate Battery (Gen 2)
ChemistryPremium Lithium Polymer (LIPO)
Configuration6S1P (6 Cells in Series)
Nominal voltage22.2V
Capacity1300mAh (28.9Wh)
Continuous discharge120C (156A)

Product overview

The WES New Energy WES 6S1P 1300mAh 120C FPV Racing LIPO Battery supplies propulsion power for 5-inch freestyle and acro drones. Its six lithium-polymer cells connect in series, giving a nominal voltage of 22.2V and capacity of 1300mAh (28.9Wh). Designed for 2207/2306 motors and 6S 2450KV+ setups, the pack combines high-density cell stacking with precision-molded shrink-wrap and an integrated wire harness. Its connections comprise an XT60 main power connector and a JST-XH balance/telemetry connector.

Continuous discharge is rated at 120C (156A), with 180C (234A) pulses limited to ≤5 seconds and maximum charging at 26A (20C). Physical specifications conflict: 238g (±3g) and 36 × 40 × 78 mm coexist with 244g (±3g) and 36 × 42 × 85 mm, leaving the installation envelope unresolved. Approximate flight duration is ~3.0–3.5 minutes for technical line flying on tight, obstacle-heavy courses. Cycle life of ≥280 cycles with less than 10% capacity loss applies at 25°C, 120A constant load and 20% DoD.

Specifications

SpecificationValue & conditions
Product seriesWES Ultra-High Discharge Rate Battery (Gen 2)
ChemistryPremium Lithium Polymer (LIPO)
Configuration6S1P (6 Cells in Series)
Nominal voltage22.2V
Capacity1300mAh (28.9Wh)
Continuous discharge120C (156A)
Pulse discharge180C (234A, ≤5 sec)Pulse duration ≤5 sec.
Weight, first specification entry238g (±3g)
Dimensions, first specification entry36 × 40 × 78 mm
ConnectorsXT60 (main), JST-XH (balance/telemetry)
Maximum charge current26A (20C)
Cell matching toleranceΔIR ≤ 0.5mΩ, ΔCap ≤ 12mAh
Weight, conflicting specification entry244g (±3g)
Dimensions, conflicting specification entry36 × 42 × 85 mm
Intended applicationPower pack for 5-inch freestyle and acro FPV drones.
Propulsion integrationDesigned for 2207/2306 motors and 6S 2450KV+ setups.
Cell assemblyHigh-density cell stacking with minimal packaging mass.
Packaging and wiringPrecision-molded shrink-wrap with an integrated wire harness.
Approximate flight duration~3.0–3.5 minTechnical line flying on tight, obstacle-heavy courses.
Cycle life≥280 cycles with less than 10% capacity lossControlled lab conditions: 25°C, 120A constant load, 20% DoD.
SOURCE WITH CHINADRONE

Request a quote for WES 6S1P 1300mAh 120C FPV Racing LIPO Battery

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
Tattu TA3000 Plus drone battery charger with carrying handle, display, and charging ports.
Batteries & charging

Grepow Tattu TA3000 Plus Drone Battery Charger

By Grepow

The Grepow Tattu TA3000 Plus is a smart charger for professional UAV batteries, supporting 12S–24S LiPo, LiHV and LiUHV soft packs and Tattu Smart Batteries. It offers charging and storage functions, automatic parameter detection and a 2.4-inch IPS display. Maximum output is 1200W at AC 110V or 3000W at AC 220V.

Tattu 4.0 smart battery with carry handle and vented metal casing.
Batteries & charging

Grepow Tattu 4.0 Battery Series

By Grepow

The Grepow Tattu 4.0 Battery Series is a 30 Ah smart battery solution for industrial heavy-lift UAVs with 70–100 kg maximum take-off weights. It combines Grepow grade A cells, battery management functions and a built-in MOSFET, with 4C–5C fast-charging support and a design addressing heat dissipation and corrosion-related short circuits.