Product overview
The HGLRC LED MINI Controller is an FPV lighting accessory with button-operated color selection and an electronic switch configurable for remote on/off. A short press changes the color, while a three-second hold toggles flash mode and leaves the LED indicator lit. Available colors are blue, red, green and yellow, with slow flash, steady on, cycle and fast flash modes. The controller measures 17mm × 12.5mm × 6.5mm, weighs 1.44g and accepts 2-6S (7.4-25V) input. Its soldering options support direct power connection or connection to a flight controller for Betaflight configuration.
The accompanying strip range comprises HGLRC LED MINI (38mm), HGLRC LED Lite (25mm) and HGLRC LED LONGXL (13mm), all requiring 5V input. The 38mm version has 12 LEDs and weighs 0.7g; the 25mm version has four LEDs and weighs 0.65g. The nominal 13mm version measures 13.33mm × 4.32mm × 1.9mm, carries four LEDs and weighs 0.12g. The two larger variants use RGB 2020 packages, while the smallest uses RGB 1010 packages. All three support plug-in or soldered connections and custom RGB effects through a flight controller or HGLRC W2812 LED controller.
The controller package includes one HGLRC LED MINI Controller, four 30AWG 100mm connecting wires in red, black, yellow and green, and one piece of heat shrink tubing. The separate strip package contains four strips in the ordered size, four SH1.03P dual-end 70mm connecting wires and four pieces of heat shrink tubing. These package contents distinguish the controller selection from the strip selections, which differ in dimensions, LED count and individual weight while sharing a 5V input requirement.
Specifications
| Specification | Value & conditions |
|---|---|
| Controller input voltage | 2-6S (7.4-25V)Applies to the controller; strip input voltage is specified separately. |
| Controller dimensions | 17mm × 12.5mm × 6.5mm |
| Controller weight | 1.44g eachWeight is per controller. |
| Controller integration modes | Direct connection to 2-6S power or connection to a flight controller for Betaflight configurationTwo soldering modes are described; select wiring appropriate to the installation. |
| Electronic switch | Remote-controlled on/off through settingsRemote on/off operates through settings. |
| Controller button operation | Short press switches colors; hold for 3 seconds toggles flash mode on/offThe LED indicator remains lit when the three-second hold toggles flash mode. |
| Controller lighting modes | Slow flash, steady on, cycle, fast flash |
| Controller colors | Blue, red, green, yellow |
| Controller supplied configuration | 1 HGLRC LED MINI Controller; 4 × 30AWG 100mm connecting wires, in red, black, yellow and green; 1 heat shrink tubingContents apply to the controller package. |
| 38mm strip input voltage | 5VApplies to HGLRC LED MINI (38mm). |
| 38mm strip dimensions | 38mm × 7.1mm × 5mm |
| 38mm strip wire length | 70mmApplies to HGLRC LED MINI (38mm). |
| 38mm strip weight | 0.7g eachWeight is per 38mm strip. |
| 38mm strip LED count and competition arrangement | 12 LEDs per strip; stated competition arrangement: 4 strips, 48 LEDs totalThe manufacturer describes this arrangement as meeting competition requirements. |
| 25mm strip input voltage | 5VApplies to HGLRC LED Lite (25mm). |
| 25mm strip dimensions | 25mm × 7.1mm × 5mm |
| 25mm strip wire length | 70mmApplies to HGLRC LED Lite (25mm). |
| 25mm strip weight | 0.65g eachWeight is per 25mm strip. |
| 25mm strip LED count and competition arrangement | 4 LEDs per strip; stated competition arrangement: 8 strips, 32 LEDs totalThe manufacturer states that eight strips are required for competition. |
| 13mm strip input voltage | 5VApplies to the variant named HGLRC LED LONGXL (13mm). |
| 13mm strip dimensions | 13.33mm × 4.32mm × 1.9mmThe nominal 13mm variant has a published length of 13.33mm. |
| 13mm strip wire length | 70mmApplies to HGLRC LED LONGXL (13mm). |
| 13mm strip weight | 0.12g eachWeight is per 13mm strip. |
| 13mm strip LED count and competition arrangement | 4 LEDs per strip; stated competition arrangement: 4 strips, 16 LEDs totalThe manufacturer describes this arrangement as meeting competition requirements. |
| Strip physical architecture | 38mm and 25mm strips: RGB 2020 LED packages; 13mm strip: RGB 1010 LED packagesLED package type depends on the selected strip size. |
| Strip connection options | Plug-in or soldered connections |
| Strip color programming | Custom RGB color effects through a flight controller or HGLRC W2812 LED controllerThese are the published programming routes; compatibility with every flight controller is not established. |
| LED strips supplied configuration | 4 HGLRC LED strips in the ordered size; 4 SH1.03P dual-end 70mm connecting wires; 4 heat shrink tubingContents apply to the strip package; strip size follows the order. |
| Local mode selection | One-touch mode switchingThe manufacturer describes local mode switching without complex computer configuration. |
| Controller connection architecture | Solder pads for LED connections |
| Connection modes | Direct 2-6S power connection or flight controller connectionFlight controller connection supports Betaflight configuration. |
Request a quote for HGLRC LED MINI Controller
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.