ChinaDroneRequest a quote →
Happymodel Mobula7 HDZERO FPV whoop drone with translucent propeller guards and red motorsHappymodel Mobula7 HDZERO FPV whoop drone with translucent propeller guards and red motors

Happymodel Mobula7 HDZERO

The Happymodel Mobula7 HDZERO is a 75mm HD FPV brushless whoop co-branded with HDZERO. It combines EX1102 KV9000 motors, 40mm tri-blade propellers, a RunCam Nano HDZero camera and an HDZero Whoop video transmitter. The aircraft supports 2S-3S batteries and integrates an SPI ExpressLRS 2.4GHz receiver.

Weight
41gram

Get a free quote

Product overview

The Happymodel Mobula7 HDZERO is an HDZERO and HappyModel co-branded HD FPV brushless whoop for first-person-view flight. Its 75mm wheelbase fits within overall dimensions of 98mm*98mm*50mm, with a weight of 41gram without battery. The aircraft combines EX1102 KV9000 motors with transparent NewBeeDrone AZI 40mm tri-blade propellers. It supports 2S-3S LiPo or LiHV batteries through an XT30 connector, with a 17mm*13mm battery holder tray. Recommended capacities are 300/350/450/550/650 mAh for 2S and 300/350/450 mAh for 3S.

Onboard equipment includes a RunCam Nano HDZero camera and an HDZero Whoop TX5S.1 video transmitter, both supporting 1280*720@60fps video. The transmitter operates at 5.8G with 25mw/200mw RF power options. The flight controller integrates Betaflight OSD, an SPI ExpressLRS 2.4GHz receiver and a 5V 1A BEC. Its onboard 4-in-1 ESC delivers 12A continuous current and 15A peak for 5 seconds. Radio control requires an ExpressLRS 2.4GHz transmitter module running ELRS 2.0 firmware; receiver packet-rate options range from 25Hz to 500Hz.

Specifications

Happymodel Mobula7 HDZERO specifications
SpecificationValue & conditions
Product identity and typeHappymodel Mobula7 HDZERO 2-3S 75mm HD FPV brushless whoop
BrandHDZERO and HappyModel co-branded
Wheelbase and overall sizeFrame wheelbase: 75mm; size: 98mm*98mm*50mm
Weight41gramWithout battery.
Aircraft battery compatibility2S-3S LiPo or LiHV battery
Recommended battery capacities2S: 300/350/450/550/650 mAh; 3S: 300/350/450 mAh2S or 3S battery configuration, respectively.
Battery connection and holderXT30 battery plug; battery holder tray: 17mm*13mm
Required radio linkExpressLRS 2.4GHz TX module with ELRS 2.0 firmware
Flight controller processorSTM32F411CEU6; 100MHZ; 512K FLASH
Flight controller sensor and mountingMPU-6000 with SPI connection; mount pattern: 25.5×25.5 M2
Flight controller battery input2-4S LiPo batteryFlight controller power supply.
Flight controller integrated equipment12A BLHeli_s ESC each; Betaflight OSD with SPI control; SPI ExpressLRS 2.4GHz receiver; 5V 1A BEC
Flight controller firmware and meter settings
  • Firmware target: CRAZYBEEF4SX1280;
  • voltage meter scale: 110;
  • amperage meter scale: 470
ESC processor and inputEFM8BB21 MCU; 2-4S LiPo/LiPo HV (7v/17v)Onboard 4-in-1 ESC.
ESC current ratings12A continuous; 15A peakPeak current duration: 5 seconds.
ESC programming, firmware and protocolsBLHeliSuite programmable; factory firmware: F_H_40_REV16_8.HEX; default protocols: DSHOT150/DSHOT300/DSHOT600
Receiver protocol and transmitter bindingSPI ExpressLRS; binds with a TX module running ELRS V2.0 firmware
Receiver packet rates25Hz/50Hz/150Hz/250Hz/500Hz
Receiver RF hardware and telemetry
  • RF frequency: 2.4GHz;
  • antenna plug: IPEX;
  • telemetry output power: less than 12dBm
Camera identityRunCam Nano HDZero; model: Racer; SKU: HDZ3203
Camera lens and digital videoLens FOV: D150 degree; digital video: 1280*720@60fps
Camera current draw450mAAt 3.3v.
Video transmitter identityHDZero Whoop (TX5S.1); model: HDZero Whoop; SKU: HDZ3110
Video transmitter RF specifications
  • Frequency: 5.8G;
  • RF power: 25mw/200mw;
  • RF connector: U.FL
Video transmitter resolution and interfaces1280*720@60fps; 4 lane MIPI CSI YUV422 interface; 20 Position 0.30mm Pitch video connectorDefault video resolution.
Video transmitter dimensions, weight and mounting
  • Size: 32.5mm x 32.5mm x 7mm;
  • weight: 5.4g;
  • mounting: 25.5mm*25.5mm, M2 clearance hole
Video transmitter current draw410mAAt 12V.
Motor model, configuration and weightEX1102 KV9000; configuration: 9N12P; weight: 2.8g; LiPo cell count: 2S-3SMotor rated for 2S-3S LiPo.
Motor dimensions
  • Stator diameter: 11mm;
  • stator length: 2mm;
  • shaft diameter: Φ1.5mm;
  • motor dimensions (diameter × length): Φ13.5mm*16mm
PropellersNewBeeDrone AZI; 40mm; tri-blade; transparent; shaft size: 1.5mm