| Product type | Mobula6 ECO 2024 1S 65mm ultra light micro HD FPV Whoop. |
|---|
| Identity, dimensions and battery connection | - Brand: HAPPYMODEL & HDZERO CO-Brand;
- model: Mobula6 ECO 2024;
- frame wheelbase: 65mm;
- aircraft weight: 23.16 gram without battery;
- aircraft size: 81mm*81mm*45mm;
- compatible battery: 1S LiPo or LiHV;
- battery plug: GNB A30.
Weight without battery. |
|---|
| Integrated features | AIO flight controller with Serial ELRS receiver; HDZERO system compatibility; SE0702 brushless motors; HDZERO ECO VTX and camera; onboard blackbox. |
|---|
| Frame and canopy | 1 × Mobula6 2024 1S 65mm whoop drone frame with canopy.Included equipment. |
|---|
| Flight controller | 1 × SuperX HD ELRS AIO flight controller.Included equipment. |
|---|
| Motors | 4 × SE0702 KV28000 brushless motors.Included equipment. |
|---|
| Propeller set | 1 set of Gemfan 1208-3 31mm tri-blade propellers: 4 CW + 4 CCW.Included equipment. |
|---|
| Video transmitter | 1 × HDZero ECO VTX.Included equipment. |
|---|
| Camera | 1 × HDZero ECO Camera.Included equipment. |
|---|
| Spare canopy | 1 × spare canopy.Included equipment. |
|---|
| Propeller removal tool | 1 × propeller removal tool.Included equipment. |
|---|
| Screwdriver | 1 × screwdriver.Included equipment. |
|---|
| Motor specifications | SE0702 KV28000; configuration: 9N12P; stator diameter: 7mm; stator length: 2mm; shaft diameter: Φ1mm; motor dimensions, diameter × length: Φ9.5mm*14mm; weight: 1.49g; LiPo cell count: 1S only.Motor battery rating: 1S LiPo only. |
|---|
| Propeller specifications | - Material: PC;
- size: 31mm;
- pitch: 0.8 in;
- weight: 0.21g;
- mounting hole diameter: 1mm.
|
|---|
| Flight controller specifications | SuperX HD ELRS; Betaflight 4.4.2 ready; firmware target: CRAZYBEEF4DX; STM32F411CEU6 MCU, 100MHz, 512K FLASH; BMI270 or ICM42688P sensor with SPI connection; integrated 12A per-channel BLHeli_S 4-in-1 ESC with DSHOT300; UART ELRS receiver with ELRS v3.0 support and Wi-Fi/pass-through firmware updates; Bluejay ESC firmware ready; 5V 1A BEC; voltage detection; no Betaflight analog OSD chip.Flight controller supports 1-2S LiPo/LiHV input at DC 2.8V~8.7V; this drone supports 1S input only. |
|---|
| Onboard 4-in-1 ESC specifications | Supply: 1-2S LiPo/LiPo HV; continuous current: 12A; peak current: 15A for 3 seconds; supports ESC-Configurator and BLHELI_S Suite configurator; factory firmware: Z-H-30 – Bluejay, 0.19, 48kHz; default protocol: DSHOT300.ESC component supply rating: 1-2S LiPo/LiPo HV; peak current duration: 3 seconds. |
|---|
| Onboard Serial ExpressLRS receiver specifications | RF frequency: 2.4GHz; antenna: 31mm enameled copper wire; telemetry output power: less than 12dBm; receiver protocol: CRSF; default firmware: ExpressLRS V3.0.1; same hardware as Happymodel EP1 receiver; firmware updates through ExpressLRS configurator, Wi-Fi or Betaflight pass-through. |
|---|
| HDZERO ECO VTX specifications | Composite HD video interface; 1S-3S input; 25mW/200mW RF output; 25.5×25.2 M2 soft mounting; antenna retention; dimensions: 32.4×32.5mm (29x29mm inner); weight: 4.5 grams; thickness: 4mm without shielding.VTX component input rating: 1S-3S. Weight and thickness exclude shielding. |
|---|
| HDZERO ECO camera specifications | Image sensor: 1/3”; resolution: 720@60fps, 4:3; lens field of view: diagonal 150°, horizontal 120°, vertical 98°; rolling shutter; net weight: 1.6g with cable; dimensions: L14mm*W14mm*H13mm.Camera net weight includes cable. |
|---|