ChinaDroneRequest a quote →
X500 V2 ARF Kit quadcopter airframe with four propellers, blue arm mounts and landing gearX500 V2 ARF Kit quadcopter airframe with four propellers, blue arm mounts and landing gear

X500 V2 ARF Kit

The GS X500 V2 ARF Kit is a carbon fiber professional drone kit with preinstalled motors, ESCs, power distribution boards and propellers. It accommodates compatible flight controllers and provides mounting holes for GPS and companion computers. Rails, a battery mount, two battery straps and installation hand tools are supplied; the battery is not included.

Flight time
~18 minutes
Wheelbase
500 mm
Weight
610 g
Payload
1.5 kg

Get a free quote

Product overview

The GS X500 V2 ARF (Almost Ready-to-Fly) Kit is a carbon fiber professional drone kit compatible with flight controllers including the Holybro Pixhawk series, Durandal and Pix32 V5. It includes the X500 V2 Frame Kit with motors, ESCs, power distribution boards and propellers preinstalled, supporting assembly in less than 15 minutes. The wheelbase is 500mm, the motor mount pattern is 16x16mm and the product weighs 610g. Hover time is approximately 18 minutes with no additional payload, tested with a 5000mAh battery. Payload is 1500g without the battery at 70% throttle.

Full carbon fiber top and bottom plates measure 144x144mm and are 2mm thick, with 28mm between them. The arms use 16mm carbon fiber tubes with fiber reinforced nylon connectors. Landing gear stands 215mm high and uses 16mm and 10mm diameter carbon fiber tubes with strengthened plastic tee connectors. The platform board provides mounting holes for GPS and companion computers such as Raspberry Pi 4 and Jetson Nano.

Supplied mounting equipment includes a rail system with two 10mm diameter rods, each 250mm long, plus a battery mount and two battery straps. Hand tools are included for installation. The recommended battery is a 4S 3000-5000mAh 20C+ LiPo battery with XT60; the battery is not included.

OEM & customization

Specifications

X500 V2 ARF Kit specifications
SpecificationValue & conditions
BrandGS
Product typeX500 V2 ARF (Almost Ready-to-Fly) carbon fiber professional drone kit
Wheelbase500mm
Motor mount pattern16x16mm
Frame body144x144mm, 2mm thick
Landing gear height215mm
Space between top and bottom plates28mm
Weight610g
Flight time~18 minutesHover with no additional payload; tested with a 5000mAh battery.
Payload1500gWithout battery; 70% throttle.
Battery recommendation4S 3000-5000mAh 20C+ LiPo battery with XT60Battery not included.
Assembly timeLess than 15 minutes
Supplied frame and preinstalled componentsX500 V2 Frame Kit with motors, ESCs, power distribution boards and propellers preinstalled
Flight controller compatibilityHolybro Pixhawk series, Durandal and Pix32 V5
Body constructionFull carbon fiber top and bottom plates, 144 x 144mm, 2mm thick
Arm construction16mm carbon fiber tubes with fiber reinforced nylon connectors
Landing gear construction16mm & 10mm diameter carbon fiber tubes with strengthened plastic tee connectors
Platform board mountingMounting holes for GPS and companion computers such as Raspberry Pi 4 and Jetson Nano
Rail mounting systemDual 10mm diameter rods, 250 mm long
Battery mounting equipmentBattery mount with two battery straps
Installation toolsHand tools for installation