ChinaDroneRequest a quote →

Gesai AMPX 40A (5-14S)

The Gesai AMPX 40A (5-14S) is a boxed drone electronic speed controller supporting 5~14S lithium batteries. It combines a specialized disc-motor control algorithm, synchronous freewheeling and CAN communication with a compatible flight control system. Integrated protection covers short circuits, stalls, startup voltage, temperature, throttle signal loss and failed motor startup.

GesaiMotors, ESCs & propellers

Get a free quote

Product overview

The Gesai AMPX 40A (5-14S) is a drone electronic speed controller supplied with a box and a CAN communication interface. Its specialized control algorithm supports disc motors, while synchronous freewheeling improves throttle linearity and driving efficiency and recovers energy automatically during motor speed reduction. The controller reaches full motor speed from startup in 0.25 seconds. Real-time communication with flight control uses the CAN interface and requires a compatible flight control system.

The AMPX 40A ESC HV supports 5~14S lithium batteries, 50-500HZ control signals and compatible 3.3V/5V PWM inputs. It measures 62.2*31.0*16.0mm and has 16AWG power wiring measuring 380mm and 16AWG motor wiring measuring 80 mm. Its current limit is 48A, and its operating environment temperature range is -20-65°C. Audible cues guide throttle-range calibration. A one-year warranty is included with the controller.

Integrated protection shuts down output on a short circuit and restores operation after a 100ms delay. Following a stall, the throttle must return to zero before operation resumes. Startup voltage protection prevents motor start below 16V or above 64V and is disabled during flight. Thermal protection reduces output at 125°C and cuts it at 140°C, restoring power gradually as temperature falls. Signal loss cuts power after 2 seconds, with automatic recovery when the signal returns. Failed motor startup triggers shutdown after 10 seconds of throttle increase.

Motors & ESCs

Specifications

Gesai AMPX 40A (5-14S) specifications
SpecificationValue & conditions
BrandGS
Model numberAMPX 40A (5-14S)
Product type and housingDrone electronic speed controller with box
ModelAMPX 40A ESC HV
Compatible signal frequency50-500HZ
PWM input signal voltage3.3V/5V (compatible)
Power wire / wire length16AWG/380mm
Supported lithium cell count5~14S
Dimensions (L*W*H)62.2*31.0*16.0mm
Operating environment temperature-20-65°C
Current limit48A
Motor wire / wire length16AWG/80 mm
Motor responseFull speed in 0.25 secondsFrom motor start to full speed.
Control algorithmSpecialized control algorithm for disc motorsFor disc motors.
Synchronous freewheelingImproves throttle linearity and driving efficiency; enables automatic energy recoveryEnergy recovery during motor speed reduction.
CAN communicationIncluded CAN interface for real-time flight-control communicationRequires a compatible flight control system.
Short circuit protectionAutomatic output shutdown; operation restored after 100ms delayWhen a short circuit is detected.
Stall protectionThrottle must return to zero to restore operationAfter stall detection.
Voltage protectionPrevents motor start below 16V or above 64VAt motor startup; voltage protection is disabled during flight.
Temperature protectionReduces output power at 125°C; cuts output at 140°C; gradually restores power as temperature decreasesAt the stated protection temperatures.
Throttle loss protectionCuts power after 2 seconds; automatically restores power upon signal recoveryAfter throttle signal loss.
Startup protectionShuts down outputIf the motor does not start within 10 seconds of throttle increase.
Throttle calibrationAudible cues guide throttle-range settingDuring throttle-range calibration.
Warranty1 yearIncluded for all purchases.

Related guides