Product overview
The Gesai GS AMPX 180A(5-18S) electronic speed controller provides drone motor control through CAN digital throttle and PWM analog throttle, giving priority to CAN commands. A dedicated control algorithm supports disc motors, with a response time of 0.60 seconds from motor start to full-speed operation. Synchronous freewheeling improves throttle linearity and driving efficiency while recovering energy automatically as motor speed decreases. Its CAN interface supports real-time communication with compatible flight control, and separate output interfaces provide RPM and error signals.
The ESC measures 117.5*56.3*42.8mm (L*W*H) and incorporates 8AWG power wire with a length of 190mm. Screw holes allow installation without an ESC orientation requirement, while the control signal interface and main power supply are fully isolated. Throttle calibration uses a connected motor: set maximum throttle before powering up, then move to minimum after two beeps. An audible "DO Mi SO" sequence confirms calibration. The controller includes a one-year warranty.
Integrated protection covers short circuits, motor stalls, voltage, temperature, throttle signal loss and unsuccessful starts. At power-up, battery voltage below 16V or above 80V triggers an alarm and prevents motor start; this voltage protection is disabled during flight. During flight, temperatures above 125°C reduce output power to 50%. At 140°C, output shuts off until throttle is reset and temperature falls below 80°C. Throttle signal loss lasting more than 2 seconds cuts power, which returns when the signal resumes.



