Product overview
The GEPRC Vapor-X5 HD O4 Pro is a powered 5-inch FPV drone built around the DJI O4 Air Unit Pro video system. Its 230 mm frame combines 2.0 mm top and middle plates, a 2.5 mm bottom plate and 5.0 mm carbon fiber arms. An aluminum lens housing, protective front lip and shock-absorbing silicone address camera protection and vibration. The installed electronics include a GEP-F722-HD v2 flight controller, barometer and TAKER H60_BLS 60A four-in-one ESC, paired with SPEEDX2 2207E 1960 KV motors.
Integration choices cover PNP, GEPRC ELRS24 and TBS Nano RX configurations, with GEP-M10 GPS available as an option. The camera installation uses the O4 Pro camera and original antenna, while an included GoPro mount provides an additional camera mounting provision. Power connects through XT60, with a recommended 6S 1300–1800mAh LiPo battery. Flight time is 14–19 minutes, and PNP-version weight is 409g±5g. The supplied package contains the drone, GEMFAN 5136 propellers, battery pads and straps, a side panel, spare hardware and two L-shaped screwdrivers.
Specifications
| Specification | Value & conditions |
|---|---|
| Options | PNP, ELRS 2.4G, TBS Nano RX, PNP with GPS, ELRS 2.4G with GPS, TBS Nano RX with GPS |
| Model | Vapor-X5 O4 Pro |
| Frame | GEP-Vapor-X5 O4 Pro frame |
| Wheelbase | 230 mm |
| Top plate thickness | 2.0 mm |
| Middle plate thickness | 2.0 mm |
| Bottom plate thickness | 2.5 mm |
| Arm thickness | 5.0 mm |
| Flight controller | GEP-F722-HD v2 |
| MCU | STM32F722 |
| Gyroscope | ICM42688-P(SPI) |
| Barometer | Yes |
| OSD | Betaflight OSD w/AT7456E |
| ESC | TAKER H60_BLS 60A 4IN1 ESC |
| Video transmitter | DJI O4 Air Unit Pro |
| Camera | O4 Pro Camera |
| Antenna | O4 Pro original antenna |
| Connector | XT60 |
| GPS | GEP-M10 GPSOptional GPS configuration. |
| Motor | GEPRC SPEEDX2 2207E 1960 KV5-inch configuration. |
| Propeller | GEMFAN 51365-inch configuration. |
| Weight | 409g±5gVapor-X5 O4 PNP version. |
| Receiver | PNP/GEPRC ELRS24/TBS Nano RX |
| Recommended battery | 6S LiPo1300mAh – 1800mAh |
| Flight time | 14-19min |
| Lens protection and vibration control | Aluminum lens components and shock-absorbing silicone for vibration reduction. |
| Protective frame features | CNC aluminum lens housing, protective front lip and wider 5mm carbon fiber arms. |
| Supplied configuration | 1 x Vapor-X5 O4 Pro; 2 x GEMFAN 5136; 2 x battery anti-slip pads; 1 x spare screw pack; 1 x Vapor side panel; 2 x M20*250mm battery straps; 1 x 1.5mm L-shaped screwdriver; 1 x 2.0mm L-shaped screwdriver; 1 x GoPro mount.Included equipment. |
| Spare hardware | 6 x M3*10mm round head screws; 6 x M3*8mm round head screws; 2 x M3*6mm flat head screws; 1 x M5*28mm thin head screw; 1 x M5 flange nut; 4 x M3 rivet nuts.Included spare screw pack. |
Request a quote for GEPRC Vapor-X5 HD O4 Pro
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.