Product overview
The GEPRC Vapor-D6 HD O3 FPV Drone is a six-inch flight platform for FPV flying and aerial footage, supplied with propulsion, flight-control and O3 imaging hardware. Its GEP-Vapor-D6 frame has a 274.60mm wheelbase and DC geometry that keeps propellers outside the camera view. CNC aluminum alloy side panels and a front lens guard protect the camera. The structure combines 2.0 mm top and middle plates, a 2.5 mm bottom plate and 5.0 mm arms.
The onboard configuration pairs a GEP-F722-HD v2 controller with a TAKER H60_BLS 60A four-in-one ESC, GEPRC SPEEDX2 2407E 1750KV motors and HQprop 6X3.5X3 propellers. Imaging uses an O3 Air Unit, O3 Camera and original O3 antenna. Integration provisions include an XT60 connector, battery straps and anti-slip pads, plus a supplied GoPro mount. Receiver configurations cover PNP, ELRS 2.4G and TBS Nano RX, each with a GPS option. The recommended battery is a 6S LiPo 1550mAh–2200mAh; flight time is 13–17 minutes, and the PNP version weighs 467g±5g.
Specifications
| Specification | Value & conditions |
|---|---|
| Options | PNP, ELRS 2.4G, TBS Nano RX, PNP with GPS, ELRS 2.4G with GPS, TBS Nano RX with GPS |
| Model | Vapor-D6 O3 |
| Frame | GEP-Vapor-D6 frame |
| Wheelbase | 274.60mm |
| Top plate thickness | 2.0 mm |
| Middle plate thickness | 2.0 mm |
| Bottom plate thickness | 2.5 mm |
| Arm thickness | 5.0 mm |
| Flight controller | GEP-F722-HD v2 |
| MCU | STM32F722 |
| Gyroscope | ICM42688-P(SPI) |
| Barometer | BMP280 |
| OSD | Betaflight OSD w/AT7456E |
| ESC | TAKER H60_BLS 60A 4IN1 ESC |
| Video transmitter | O3 Air Unit |
| Camera | O3 Camera |
| Antenna | O3 original antenna |
| Connector | XT60 |
| 6-inch motor | GEPRC SPEEDX2 2407E 1750KV |
| 6-inch propeller | HQprop 6X3.5X3 |
| Weight | 467g±5gVapor-D6 O3 PNP version. |
| Receiver | PNP/GEPRC ELRS24/TBS Nano RX |
| Recommended battery | 6S LiPo 1550mAh – 2200mAh |
| Flight time | 13-17 min |
| GPS | GEP-M10 GPSOptional equipment. |
| Frame architecture | DC structure developed from the Wide X version. |
| Camera clearance and protection | DC geometry keeps propellers out of the camera view. |
| Camera protective structure | CNC aluminum alloy side panels and a front lens guard protect the camera. |
| Included equipment | 1 x Vapor-D6 O3; 2 x HQprop 6X3.5X3; 2 x battery anti-slip pads; 1 x spare screw pack; 2 x M20*250mm battery straps; 1 x 1.5mm L-shaped screwdriver; 1 x 2.0mm L-shaped screwdriver; 1 x GoPro mount.Supplied package. |
Request a quote for GEPRC Vapor-D6 HD O3 FPV Drone
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.