Product overview
The GEPRC Vapor-D5 O4 Pro WTFPV is a 5-inch FPV flight platform supplied in PNP configuration, with propulsion and flight-control hardware fitted. Its GEP-Vapor-D5 O4 Pro frame has a 238.43mm wheelbase, carbon fiber arms measuring 5.0 mm thick, 2.0 mm top and middle plates, and a 2.5 mm bottom plate. Newly molded side plates accompany a CNC aluminum alloy lens mount. Vibration-damping silicone is intended to reduce lens-mount resonance, while a front lip provides additional physical protection for the lens.
The platform provides integration for the DJI O4 Air Unit Pro, but this WTFPV configuration supplies no video transmitter, camera, antenna or GPS. Its receiver specification is PNP. Flight electronics comprise a GEP-F722-HD v2 controller with an STM32F722 MCU, ICM42688-P SPI gyroscope, BMP280 barometer and Betaflight OSD with AT7456E. A TAKER H60_BLS 60A four-in-one ESC drives GEPRC SPEEDX2 2207E 1960 KV motors paired with GEMFAN 5136 propellers. The power connection is XT60, and the recommended battery is a 6S LiPo rated at 1550mAh–2200mAh.
The Vapor-D5 WTFPV PNP version weighs 405g±5g, with a stated flight time of 13–17 minutes. Supplied accessories comprise two GEMFAN 5136 items, two battery anti-slip pads, a spare screw pack and two M20*250mm battery straps. Three L-shaped screwdrivers cover 1.5mm, 2.0mm and 3.0mm sizes. A GoPro mount, GPS mount and Vapor side panel are also included. These mounts provide accessory integration points; the supplied GPS mount accompanies a configuration without a GPS module. A flight battery is recommended separately and does not appear in the supplied equipment list.
Specifications
| Specification | Value & conditions |
|---|---|
| Model | GEPRC Vapor-D5 O4 Pro WTFPV |
| Frame | GEP-Vapor-D5 O4 Pro frame |
| Wheelbase | 238.43mm |
| Top plate thickness | 2.0 mm |
| Middle plate thickness | 2.0 mm |
| Bottom plate thickness | 2.5 mm |
| Arm thickness | 5.0 mm |
| Flight controller | GEP-F722-HD v2 |
| MCU | STM32F722 |
| Gyroscope | ICM42688-P(SPI) |
| Barometer | BMP280 |
| OSD | Betaflight OSD w/AT7456E |
| ESC | TAKER H60_BLS 60A 4IN1 ESC |
| Video transmitter | Not supplied |
| Camera | Not supplied |
| Antenna | Not supplied |
| Power connector | XT60 |
| GPS | Not supplied |
| Motor | GEPRC SPEEDX2 2207E 1960 KV5-inch configuration. |
| Propeller | GEMFAN 51365-inch configuration. |
| Weight | 405g±5gVapor-D5 WTFPV PNP version. |
| Receiver configuration | PNP |
| Recommended battery | 6S LiPo 1550mAh – 2200mAh |
| Flight time | 13-17 min |
| Video-system integration | Supports DJI O4 Air Unit Pro integration; redesigned lens mount with vibration-damping silicone intended to reduce resonance. |
| Lens mount and protection | CNC aluminum alloy lens mount with a protective front lip. |
| Arm material and side plates | Carbon fiber arms with newly molded side plates. |
| Supplied configuration and accessories | 1 x Vapor-D5 WTFPV; 2 x GEMFAN 5136; 2 x battery anti-slip pads; 1 x spare screw pack; 2 x M20*250mm battery straps; 1 x L-shaped screwdriver each in 1.5mm, 2.0mm and 3.0mm sizes; 1 x GoPro mount; 1 x GPS mount; 1 x Vapor side panel.Included equipment. |
Request a quote for GEPRC Vapor-D5 O4 Pro WTFPV
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.