Product overview
The GEPRC TriPro6 WTFPV is a powered flight platform for long-range FPV exploration and aerial photography. Its GEP-TP6 frame combines a 265mm wheelbase and 5mm main plate with an independent six-point suspended front module. Flight electronics comprise the TAKER F722 45A 32Bit AIO, paired with SPEEDX2 2205E 1400KV motors and HQProp 6×4.3 propellers. The specified weight is 383 ± 5g. GPS-equipped configurations offer PNP, ELRS 915MHz/2.4GHz GemX or TBS Diversity Nano RX choices, with corresponding WCC versions supplied without a camera cage.
Imaging integration remains part of the configuration work: the WTFPV specifications list no video transmitter, camera or antenna. Supplied integration hardware includes camera damping balls, an O4 Air Unit Pro ND8 filter, O4 antenna fixing parts and a suspended imaging unit heat sink, alongside battery mounting accessories, propeller packs, tools and spare screws. The XT60 battery connection accompanies recommendations for a GEPRC 18650 6S1P 3000mAh or Storm 2.0 LiPo 6S 2200mAh battery. Flight time is 26–28 minutes during slow cruising; flight style and conditions affect actual endurance.
Specifications
| Specification | Value & conditions |
|---|---|
| Model | GEPRC TriPro6 WTFPV / WTFPV(WCC) |
| Purpose | Lightweight 6-inch long-range FPV drone for extended flights, outdoor exploration and aerial photography. |
| Front architecture | Independent six-point suspended front module shared across compatible models. |
| Configuration options | PNP With GPS; ELRS 915M/2.4G With GPS; TBS Diversity Nano RX With GPS; and each of these configurations as WCC (Without Camera Cage). |
| Frame | GEP-TP6 |
| Main plate thickness | 5mm |
| Wheelbase | 265mm |
| Flight system | TAKER F722 45A 32Bit AIO |
| MCU | STM32F722RET6 |
| Gyroscope | ICM42688-P |
| Flight controller firmware | GEPRC_F722_AIO_4.5.2 |
| Flash | 16MB |
| ESC | 32Bit 45A |
| Motor | SPEEDX2 2205E 1400KV |
| Propellers | HQProp 6×4.3 |
| Battery connector | XT60 |
| Video transmitter | None |
| Camera | None |
| Antenna | None |
| Receiver | ELRS 915MHz/2.4GHz GemX / TBS Diversity Nano RX / PNP |
| Weight | 383 ± 5g |
| GPS | GEP-M10 |
| Recommended battery | GEPRC 18650 6S1P 3000mAh Battery / Storm 2.0 LiPo 6S 2200mAh Battery |
| Flight time | 26–28 minutesSlow cruising flights; actual flight time varies with flight style and conditions. |
| Supplied configuration and accessories | 1 × TriPro6 Drone; 1 × battery carbon plate; 4 × printed landing pads; 3 × 50° camera gimbal damping balls; 1 × GEPRC O4 Air Unit Pro New ND8 filter; 1 × nose top cover; 1 pair of O4 antenna fixing injection molded parts; 1 × 20*300mm battery strap; 2 × Cinebot acrylic plates; 2 packs of HQProp 64.3 propellers; 2 × anti-slip battery pads; 1 each of 1.5mm and 2.0mm L-shaped hex screwdrivers; 1 × M8 wrench; 1 × quick start guide; 1 × SH1.0-6P female cable set; 1 × screw pack; 1 × keychain; 1 × binding pin; 1 × suspended imaging unit heat sink. |
| Spare screw kit | Socket head screws: 2 × M2*8 and 2 × M2*7. Button head screws: 6 × M2*9, 6 × M2*8, 6 × M2*6 and 2 × M2*4. Flat head screws: 4 × M2*5 and 4 × M2*3.5. |
Request a quote for GEPRC TriPro6 WTFPV
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.