Product overview
The GEPRC TriPro6 O4 Pro is a 6-inch FPV flight platform for extended outdoor flights, exploration and aerial photography. Its GEP-TP6 frame combines a 265mm wheelbase with a 5mm main plate, while the front imaging module uses independent six-point suspension. The nose follows the Cinebot design, and the suspended module is shared across compatible models. The specified weight is 383 ± 5g. Propulsion pairs SPEEDX2 2205E 1400KV motors with HQProp 6×4.3 propellers.
The electronics configuration combines a TAKER F722 45A 32Bit AIO flight system with DJI O4 Air Unit Pro video transmission, camera and antenna. GEP-M10 GPS accompanies the PNP, ELRS and TBS Diversity Nano RX options. Integration centers on this installed flight and imaging equipment, the suspended front module and an XT60 battery connection. Recommended power choices are the GEPRC 18650 6S1P 3000mAh battery or Storm 2.0 LiPo 6S 2200mAh battery. Flight time is 26–28 minutes during slow cruising; flight style and conditions affect actual duration.
The supplied package contains one TriPro6 drone with battery mounting accessories, printed landing pads, camera damping balls, an ND8 filter, nose cover and antenna fixing parts. It also includes two packs of propellers, acrylic plates, a suspended imaging unit heat sink, a cable set, binding pin, tools and spare screws. This is a drone package with flight electronics and imaging hardware. Procurement choices include the GPS-equipped receiver configuration and selection of a recommended battery for the intended flight setup.
Specifications
| Specification | Value & conditions |
|---|---|
| Purpose | 6-inch long-range FPV drone for extended flights, outdoor exploration and aerial photography. |
| Front module architecture | Independent six-point suspended front module shared across compatible models. |
| Options | PNP With GPS, ELRS 915M/2.4G With GPS, TBS Diversity Nano RX With GPS |
| Model | TriPro6 O4 Pro |
| Frame | GEP-TP6 |
| Main plate thickness | 5mm |
| Wheelbase | 265mm |
| Flight system | TAKER F722 45A 32Bit AIO |
| MCU | STM32F722RET6 |
| Gyroscope | ICM42688-P |
| FC firmware | GEPRC_F722_AIO_4.5.2 |
| Flash | 16MB |
| ESC | 32Bit 45A |
| Motor | SPEEDX2 2205E 1400KV |
| Propellers | HQProp 6×4.3 |
| Battery connector | XT60 |
| Video transmitter | DJI O4 Air Unit Pro |
| Camera | DJI O4 Air Unit Pro Camera |
| Antenna | DJI O4 Air Unit Pro Antenna |
| Receiver | ELRS 915MHz/2.4GHz GemX / TBS Diversity Nano RX / PNP |
| Weight | 383 ± 5g |
| GPS | GEP-M10 |
| Recommended battery | GEPRC 18650 6S1P 3000mAh Battery / Storm 2.0 LiPo 6S 2200mAh Battery |
| Flight time | 26–28 minutesTested during slow cruising flights; actual flight time may vary depending on flight style and conditions. |
| Supplied configuration and accessories | 1 × TriPro6 Drone; 1 × battery carbon plate; 4 × printed landing pads; 3 × 50° camera gimbal damping balls; 1 × GEPRC O4 Air Unit Pro New ND8 filter; 1 × nose top cover; 1 pair of O4 antenna fixing injection molded parts; 1 × 20*300mm battery strap; 2 × Cinebot acrylic plates; 2 packs of HQProp 64.3 propellers; 2 × anti-slip battery pads; 1 × 1.5mm L-shaped hex screwdriver; 1 × 2.0mm L-shaped hex screwdriver; 1 × M8 wrench; 1 × quick start guide; 1 × SH1.0-6P female cable set; 1 × screw pack; 1 × keychain; 1 × binding pin; 1 × suspended imaging unit heat sink.Included equipment. |
| Spare screw kit contents | 2 × socket head screws M2*8; 2 × socket head screws M2*7; 2 × button head screws M2*9; 6 × button head screws M2*8; 4 × flat head screws M2*5; 4 × flat head screws M2*3.5.Included spare screw kit. |
Request a quote for GEPRC TriPro6 O4 Pro
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.