Product overview
The GEPRC Thinking P16 4K is a CineWhoop flight platform for indoor flying and 4K recording. Its GEP-TKP16 frame has propeller guards and 79mm motor-to-motor spacing, with GR1103 8000KV motors and Gemfan 1636 propellers. The built-in Caddx Loris camera supports 4K 60fps. Flight electronics comprise a TAKER F411 8Bit 12A controller with an STM32F411 MCU, six-axis gyro and Betaflight OSD using an AT7456E chip. Four 12A BLHeli_S ESC channels support Dshot, Multishot and OneShot, while a RAD Whoop 5.8G 400mw VTX provides video transmission.
Receiver integration offers a receiver-free PNP configuration alongside Frsky R-XSR, Frsky XM+, FlySky A8S and TBS NanoRX variants. Supplied equipment comprises one drone, four GEMFAN 1636 propellers, two 15*120 battery straps, a 1.5mm L screwdriver and a 5.8G antenna. The recommended power arrangement uses a 3S 300mAh LiPo. Indoor acrobatic duration is four minutes with the specified motors, 1.6-inch propellers and that battery; indoor flying also has a separate 4.5-minute figure. Aircraft weight is 55.5g without a battery, with a separate 55g figure excluding both battery and receiver.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer and model | GEPRC Thinking P16 4K |
| Frame | GEP-TKP16 |
| Flight controller | TAKER F411 8Bit 12A |
| Camera | Caddx Loris 4K |
| Motor spacing | 79mm |
| Propeller | Gemfan 1636 |
| Antenna | 5.8G |
| Motor | GR1103 8000KV |
| Aircraft weight | 55.5gWithout battery. |
| Receiver configurations | Without Receiver(PNP) / Frsky R-XSR / Frsky XM+ / FlySky A8S / TBS NanoRX |
| MCU | STM32F411 |
| Gyro | 6-Axis |
| OSD | BetaFlight OSD w/ AT7456E chip |
| Firmware target | GEPRCF411 |
| ESC | 12A * 4 BLHeli_S (Dshot/Multishot/OneShot) |
| Video transmitter | RAD Whoop 5.8G 400mw VTX |
| Recommended battery specification | 3s 300 HMS 11.4V 30C/60C (65mmx19mmx11mm) |
| Additional weight entry | 300 g |
| Dimensions | 300 × 200 × 100 mm |
| Receiver selection options | PNP, Frsky XM+, Frsky R-XSR, TBS NanoRX |
| Flight controller revision | January 7, 2023: GEP-12A-F4 AIO replaced by TAKER F411 8Bit 12A FC |
| Video transmitter revision | January 7, 2023: 5.8GHz (48 Channel IRC Tramp,PIT/25/100/200mW) replaced by RAD Whoop 5.8G 400mw VTX |
| Physical architecture | Whoop-style frame with propeller guards |
| Camera recording specification | Built-in Caddx Loris, 4K 60fps |
| Indoor acrobatic duration | 4 minutesGR1103 8000kv motors, 1.6-inch propellers and a 3S 300mah LiPo battery; indoor acrobatics. |
| Indoor flight duration | 4.5 minutesIndoor flying. |
| Feature weight | 55gWithout battery and receiver. |
| Flight controller board weight | 5.6g |
| Supplied configuration | 1× Thinking P16 4K CineWhoop Drone; 4× GEMFAN 1636; 2× battery strap 15*120; 1× 1.5mm L screwdriver; 1× 5.8G antenna |
Request a quote for Thinking P16 4K
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.