Product overview
The GEPRC Storm 6S 1300mAh 120C Lipo Battery supplies power for freestyle and racing quadcopters, with toys and boats also listed as applications. Its LiPo pack uses a 6S1P cell arrangement, with 1300mAh capacity, 22.2V nominal voltage and 28.86Wh energy. The physical package measures 38.5 × 38.5 × 77mm and weighs 207.0g, providing concrete dimensions and mass for installation planning. Its exterior is flat and smooth, with welded power cable connections. The supplied configuration contains one battery.
Electrical integration uses XT60 connections for both charging and discharge, with a maximum discharge rating of 120C. The specification recommends 1C charging and permits a maximum of 3C; additional charging guidance recommends 1–1.5C. LiPo full-charge voltage must remain at or below 4.2V per cell, and discharge must not fall below 3.7V per cell. Charge at 0–45°C in a cool, ventilated environment, allowing a recently used pack to cool below 45°C first. Long-term storage requires 3.80–3.85V per cell and a charge-discharge activation within three months.
Specifications
| Specification | Value & conditions |
|---|---|
| Model | Storm 6S1300mAh120C |
| Model number | GEP13006S120A |
| Capacity | 1300mAh |
| Cell configuration | 6S1P |
| Nominal voltage | 22.2V |
| Battery chemistry | LiPo |
| Energy | 28.86Wh |
| Dimensions | 38.5*38.5*77(mm) |
| Weight | 207.0g |
| Maximum discharge rating | 120C |
| Charge connector | XT60 |
| Discharge connector | XT60 |
| Recommended charging current | 1C |
| Maximum charging current | 3C |
| Additional charging-rate guidance | FAQ guidance recommends 1–1.5C and supports up to 3C. |
| Charging-voltage distinction | Ordinary battery maximum charging voltage: 4.2V; high-voltage battery maximum charging voltage: 4.35V.Ordinary versus high-voltage battery chemistry. |
| Recommended chargers | HOTA D6 PRO, ISDT 608AC and ToolkitRC M6D |
| Intended purpose | Battery for freestyle and racing quadcopters. |
| Listed applications | Toys, boats and quadcopters. |
| Supplied configuration | 1 × GEPRC Storm 6S1300mAh120C battery. |
| Physical construction | Flat exterior, smooth surface and welded power cable connections. |
| Maximum full-charge voltage | Not more than 4.2V per cell.LiPo chemistry; per cell. |
| Minimum discharge voltage | Do not discharge below 3.7V; over-discharge can damage the battery and cause swelling.Per cell during discharge. |
| Storage voltage | 3.80V–3.85V per cell.Long-term storage; per cell. |
| Charge-discharge maintenance interval | Perform a charge-discharge activation within 3 months.Battery storage maintenance. |
| Charging temperature | 0–45°C.Charging in a cool, ventilated environment. |
| Cooling before charging | Allow the battery to cool below 45°C before charging.Charging after use. |
| Charging supervision | Do not charge unattended.During charging. |
| Assembly and wiring restriction | Do not disassemble, reassemble or change the wiring because of short-circuit and burning risk. |
| Post-collision inspection | Remove the battery and inspect the battery and connector.Following a collision during use. |
Request a quote for GEPRC Storm 6S 1300mAh 120C Lipo Battery
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
