ChinaDrone.Request a quote ↗
COMMERCIAL AIRCRAFT

GEPRC MOZ7 V2 Analog

By GEPRC ↗

The GEPRC MOZ7 V2 Analog is a long-range FPV drone with a 336mm wheelbase, analog imaging, GPS and selectable receivers. It supports flexible action camera and battery positioning. Its 25-minute flight time is based on slow cruising tests; actual results may vary with product differences, firmware version, flying style and environment.

Request a quote ↗
GEPRC MOZ7 V2 Analog FPV quadcopter with black frame, orange mounts and rear antennas
GEPRC MOZ7 V2 Analog FPV quadcopter with black frame, orange mounts and rear antennas
Flight time25 minutesBased on slow cruising tests; actual results may vary due to product differences, firmware version, flying style, and environment.
ModelGEPRC MOZ7 V2 Analog
FrameGEP-MOZ7 V2
Wheelbase336mm
Top plate thickness2.5mm
Bottom plate thickness2.5mm

Product overview

The GEPRC MOZ7 V2 Analog is a long-range FPV flight platform built around the GEP-MOZ7 V2 frame, with a 336mm wheelbase and a weight of 782±10g. Its structure combines 6mm arms, a 3mm clamp plate and 2.5mm top and bottom plates. Analog imaging uses a CADDX RATEL2 camera, MATEN 5.8G 2.5W video transmitter and Momoda2 antenna. A swappable action camera mount and two battery mounting options allow different equipment positions. The power connection is an XT60E-M.

Flight electronics combine a TAKER H743 BT controller, STM32H743 processor, dual gyroscopes, GEP-M1025 GPS and TAKER H65_8S_32Bit 65A four-in-one ESC. SPEEDX2 2809 1280KV V1.1 motors drive HQ three-blade propellers. Receiver choices are PNP, ELRS 915MHz/2.4G GemX and TBS Nano RX. The package supplies the drone, propellers, straps, anti-slip pads, antennas, tools and spare screws. Recommended batteries are LiPo 6S 3300mAh or Lilon 8000mAh. The 25-minute flight time is based on slow cruising tests; actual duration may vary with product differences, firmware version, flying style and environment.

Specifications

SpecificationValue & conditions
ModelGEPRC MOZ7 V2 Analog
FrameGEP-MOZ7 V2
Wheelbase336mm
Top plate thickness2.5mm
Bottom plate thickness2.5mm
Clamp plate thickness3mm
Arm thickness6mm
Flight controllerTAKER H743 BT
MCUSTM32H743
GyroscopesMPU6000&42688-P dual
GPSGEP-M1025
OSDBetaFlight OSD w / AT7456E chip
ESCTAKER H65_8S_32Bit 65A 4IN1 ESC
Video transmitterMATEN 5.8G 2.5W
CameraCADDX RATEL2
AntennaMomoda2-5.8G-SMA-RHCP-170mm
Power connectorXT60E-M
MotorSPEEDX2 2809 1280KV V1.1
PropellerHQ 7.5*3.7*3 3-blade-transparent grey
Weight782±10g
Receiver configurationsPNP / ELRS 915M/2.4G GemX / TBSNanoRX
Receiver optionsPNP, ELRS 915MHz/2.4G GemX, TBS Nano RX
Recommended batteryLiPo 6S 3300mAh / Lilon 8000mAh
Flight time25 minutesBased on slow cruising tests; actual results may vary due to product differences, firmware version, flying style, and environment.
Motor revisionJuly 19, 2025: GEPRC SPEEDX2 2809 V1.1 1280kv replaced GEPRC SPEEDX2 2809 V1.1 1450kv.
ESC revisionJuly 19, 2025: GEPRC TAKER H65_8S_32Bit 65A 4IN1 ESC replaced GEPRC GEP-BL32 50A 96K 4IN1 ESC.
Barometer supportSupported
Camera and battery integrationSwappable action camera mount; two battery mounting options.
Supplied configuration1 × GEPRC MOZ7 V2 FPV; 2 × HQ 7.5*3.7*3 (2CW+2CCW); 2 × 15*250mm battery straps; one each 1.5mm, 2.0mm and 3.0mm L-shaped screwdriver; 1 × spare screw pack; 2 × battery anti-slip pads; 1 × frequency pairing ejector pin; 1 × VTX antenna; 1 × tri-band stick antenna.
SOURCE WITH CHINADRONE

Request a quote for GEPRC MOZ7 V2 Analog

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.