Product overview
The GEPRC MOZ7 HD O3 Long Range FPV is an equipped flight platform for long-range FPV flying and aerial recording. Its H-shaped GEP-MOZ7 frame has protective side plates, a 320mm wheelbase and dimensions of 280mm×310mm. Top and bottom plates are each 3.0mm thick, with 6.0mm arm plates. CNC aluminum camera side plates accommodate 19mm or 20mm cameras by changing their installation position. Carbon reinforcement supports the printed camera fixing, while cooling fins serve the video transmitter.
Integration space accommodates a maximum 30.5×30.5mm stack and a video transmitter measuring 30mm*30mm externally. Motor mounting patterns are 16mm×16mm and 19mm×19mm. The TAKER F722 BT FC V3 controller supports Bluetooth parameter adjustment through a mobile phone. Flight hardware includes a GEP-4NI1 ESC BLHeli_32 50A, 2809-1280KV motors for the 6s version and GEP-M10 GPS. DJI O3 imaging supports recording up to 4K/120fps. Receiver configurations comprise PNP, TBS NanoRX, ELRS 2.4G and ELRS 915M.
The supplied package contains one MOZ7 HD O3 aircraft, HQ 7.5×3.5×3 propellers in four pairs, battery straps in two lengths, silicone battery pads, screws, printed parts and hand tools. The aircraft propeller specification is HQ7.5*3.7*3. Recommended batteries are VTC6 6S 6000mAh or LiPo 6s 3300mAh. Flight time with a GEP-VTC6-6000mAh battery is 30 minutes, decreasing to 20 minutes when carrying a GoPro 10. The aircraft has a specified weight of 700.5g.
Specifications
| Specification | Value & conditions |
|---|---|
| Model | MOZ7 |
| Frame | GEP-MOZ7 |
| Dimensions | 280mm×310mm |
| Wheelbase | 320mm |
| Top plate | 3.0mm |
| Bottom plate | 3.0mm |
| Arm plate | 6.0mm |
| Splint plate | 3.0mm |
| Camera mount | 2.0mm |
| VTX cover | 1.5mm |
| Flight controller | TAKER F722 BT FC V3 |
| Flight controller revision | August 30, 2024: changed from SPAN F722-BT-HD V2 to TAKER F722 BT FC V3. |
| MCU | STM32F722 |
| Gyro | 42688-P (SPI) |
| Video transmitter | O3 Air Unit |
| ESC | GEP-4NI1 ESC BLHeli_32 50A |
| Propeller | HQ7.5*3.7*3 |
| Antenna | Momoda 5.8G RP-SMA LHCP 120MM |
| Motor | 2809-1280KV(6s version)6s version. |
| GPS | GEP-M10 |
| Camera | DJI O3 Air Unit |
| Weight | 700.5g |
| Receiver configurations | PNP, TBS NanoRX, ELRS 2.4G, ELRS 915M |
| Receiver selection options | PNP, ELRS 2.4G, ELRS 915, TBS Nano RX |
| Recommended battery | VTC6 6S 6000mAh / LiPo 6s 3300mAh |
| Electronics installation space | Maximum stack: 30.5×30.5mm; video transmitter: 30mm*30mm outer size.Video transmitter dimension is its outer size. |
| Camera and motor mounting | CNC aluminum alloy camera side plates; 19mm and 20mm camera mounts; 16mm×16mm and 19mm×19mm motor mounting patterns. |
| Recording capability | Up to 4K/120fps recording.DJI O3 configuration. |
| Flight time | 30 minutes; 20 minutes with GoPro 10.GEP-VTC6-6000mAh battery; 20-minute configuration additionally carries a GoPro 10. |
| Supplied configuration and accessories | 1 × MOZ7 HD O3; 4 × HQ 7.5×3.5×3 (4 pairs); 2 × M20*250mm battery straps; 2 × M20*300mm battery straps; 2 × battery silicone pads; 1 × screw set; 1 × 3D printed parts; 1 × L-shaped screwdriver each in 1.5mm, 2mm and 3mm; 1 × M5 wrench.Included MOZ7 HD O3 package. |
Request a quote for GEPRC MOZ7 HD O3 Long Range FPV
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.