Product overview
The GEPRC MOZ7 Analog Long Range FPV is a powered flight platform built around the GEP-MOZ7 H-shaped frame. Its 280mm×310mm footprint and 320mm wheelbase accommodate 6.0mm arms, 3.0mm top and bottom plates, and protective side plates around the electronics. The installed flight system combines a TAKER F722 BT FC V3 controller, a 50A BLHeli_32 ESC, 2809-1280KV motors for the 6s version, and HQ7.5*3.7*3 propellers. A GEP-M10 GPS and Caddx Ratel2 camera complete the principal navigation and FPV hardware.
Integration space supports a maximum 30.5×30.5mm electronics stack and a video transmitter with 30mm×30mm outer dimensions. CNC aluminum camera side plates accommodate 19mm or 20mm camera mounts, while motor mounting holes support 16mm×16mm and 19mm×19mm patterns. Built-in Bluetooth enables mobile-phone parameter adjustment. This analog configuration uses the GEPRC RAD 5.8G&1.6W transmitter and a Momoda RHCP antenna. Receiver choices comprise PNP, TBS NanoRX, ELRS 2.4G and ELRS 915M, allowing procurement to specify the required receiver configuration.
The supplied package contains one MOZ7 Analog aircraft, propellers, battery straps and pads, screws, printed parts and assembly tools. The listed package propellers are HQ 7.5×3.5×3, distinct from the HQ7.5*3.7*3 operating specification. Recommended batteries are VTC6 6S 6000mAh or LiPo 6s 3300mAh; neither is listed among the included items. Flight duration is 30 minutes with the GEP-VTC6-6000mAh battery, falling to 20 minutes when carrying a GoPro 10. These durations therefore depend on the specified battery and camera configuration.
Specifications
| Specification | Value & conditions |
|---|---|
| Model | MOZ7 |
| Frame | GEP-MOZ7 |
| Dimensions | 280mm×310mm |
| Wheelbase | 320mm |
| Top plate | 3.0mm |
| Bottom plate | 3.0mm |
| Arm plate | 6.0mm |
| Splint plate | 3.0mm |
| Camera mount | 2.0mm |
| VTX cover | 1.5mm |
| Flight controller | TAKER F722 BT FC V3 |
| Flight controller revision | August 30, 2024: changed from SPAN F722-BT-HD V2 to TAKER F722 BT FC V3. |
| MCU | STM32F722 |
| Gyroscope | 42688-P (SPI) |
| Video transmitter | GEPRC RAD 5.8G&1.6W |
| ESC | GEP-4NI1 ESC BLHeli_32 50A |
| Propeller | HQ7.5*3.7*3 |
| Antenna | Momoda 5.8G RP-SMA RHCP 120MM |
| Motor | 2809-1280KV6s version. |
| GPS | GEP-M10 |
| Camera | Caddx Ratel2 |
| Weight | 675.5g |
| Receiver configurations | PNP, TBS NanoRX, ELRS 2.4G, ELRS 915M |
| Recommended battery | VTC6 6S 6000mAh / LiPo 6s 3300mAh |
| Frame architecture | H-shaped frame for long-range flight. |
| Electronics installation space | Protective side plates; maximum 30.5×30.5mm stack and 30mm*30mm video transmitter outer size. |
| Camera and motor mounting | CNC aluminum alloy camera side plates support 19mm and 20mm camera mounts; motor mounting patterns are 16mm×16mm and 19mm×19mm. |
| Parameter adjustment | Wireless parameter adjustment through a mobile phone.Flight controller with built-in Bluetooth. |
| Flight duration | 30 minutes; 20 minutes with GoPro 10.GEP-VTC6-6000mAh battery; 20-minute figure includes GoPro 10. |
| Included equipment | 1 × MOZ7 Analog; 4 × HQ 7.5×3.5×3 (4 pairs); 2 × M20*250mm battery straps; 2 × M20*300mm battery straps; 2 × battery silicone pads; 1 screw set; 1 set of 3D printed parts; 1 each of 1.5mm, 2mm and 3mm L-shaped screwdrivers; 1 × M5 wrench.MOZ7 Analog supplied configuration. |
Request a quote for GEPRC MOZ7 Analog Long Range FPV
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.