Product overview
The GEPRC MARK5 O4 Pro Wide X FPV Drone is an equipped flight platform built around the DJI O4 Air Unit Pro video system. Its camera uses a 1/1.3-inch sensor and supports recording up to 4K 120fps, with live transmission reaching 1080P 100fps. The wide-X frame has a 225mm wheelbase and a specified weight of 414g ± 5g. An aluminum camera mount and molded silicone damping address camera vibration and resonance, while quick-release arms use two screws for replacement.
The electronics configuration combines a GEP-F722-BT-HD V3 flight controller, STM32F722 microcontroller, ICM42688-P SPI inertial sensor and GEP-BL32 50A 96K four-in-one ESC. SPEEDX2 2107.5 1960KV motors drive Gemfan 5136 propellers. A dedicated compartment accommodates the capacitor and buzzer, and Bluetooth supports tuning through a mobile app. Power connects through an XT60H-M connector, with LiPo 6S 1050mAh-1550mAh batteries recommended. Receiver selections are 6S PNP, 6S ELRS 2.4G and 6S TBS Nano RX.
The supplied package contains the drone, a Gemfan 5136 propeller set with two clockwise and two counterclockwise propellers, three battery straps, two battery anti-slip pads, a 3D printouts pack and spare hardware. Maintenance tools include 1.5mm, 2mm and 3mm L-shaped screwdrivers plus an M8 wrench. A flight battery is recommended separately and is absent from the included-equipment list. Flight time is specified as 6-8 minutes under slow cruising conditions; duration varies with product differences, firmware version, flying style and environment.
Specifications
| Specification | Value & conditions |
|---|---|
| Model | MARK5 O4 Pro Wide X FPV |
| Color | Emerald Green |
| Receiver options | 6S PNP, 6S ELRS 2.4G, 6S TBS Nano RX |
| Wheelbase | 225mm |
| Video transmitter | DJI O4 Air Unit Pro VTX module |
| Camera | DJI O4 Air Unit Pro camera module |
| Antenna | DJI O4 Air Unit Pro Antenna |
| Motor | SPEEDX2 2107.5 1960KV |
| Propeller | Gemfan 5136 |
| Flight controller | GEP-F722-BT-HD V3 |
| Microcontroller | STM32F722 |
| Inertial measurement unit | ICM42688-P(SPI) |
| On-screen display | BetaFlight OSD w / AT7456E chip |
| Electronic speed controller | GEP-BL32 50A 96K 4IN1 ESC |
| Power connector | XT60H-M |
| Receiver | PNP / ELRS 2.4G / TBS NanoRX |
| Recommended battery | LiPo 6S 1050mAh-1550mAh |
| Weight | 414g ± 5g |
| Flight time | 6-8 minutesBased on slow cruising tests; actual duration may vary with product differences, firmware version, flying style, and environment. |
| Image sensor | 1/1.3-inchDJI O4 Air Unit Pro. |
| Recording and live transmission | Up to 4K 120fps recording; real-time transmission reaching 1080P 100fpsDJI O4 Air Unit Pro. |
| Camera mounting | Aluminum camera mount with silicone damping |
| Arm maintenance | Quick-release arms with two-screw replacement |
| Integration compartment | Dedicated compartment for the capacitor and buzzer |
| Tuning interface | Bluetooth tuning via mobile app |
| Supplied configuration and accessories | 1 × GEPRC MARK5 O4 Pro FPV; 1 × Gemfan 5136 set (2CW, 2CCW); 1 × 15*250mm strap; 2 × 20*250mm straps; 2 × battery anti-slip pads; 1 × 3D printouts pack; 1 × spare screw pack; 1 each of 1.5mm, 2mm and 3mm L-shaped screwdrivers; 1 × M8 wrench |
| Spare hardware | 1 × M5 flange nylon knurled nut; 2 × M2 stainless steel press-fit nuts; 1 × M5*25 stainless steel button head hex screw; 4 × M3*10 button head hex screws; 4 × M3*8 button head hex screws; 2 × M3*8 countersunk hex screws; 2 × M3*5 countersunk hex screwsIncluded spare screw pack. |
Request a quote for GEPRC MARK5 O4 Pro Wide X FPV Drone
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.