ChinaDrone.Request a quote ↗
COMMERCIAL AIRCRAFT

GEPRC MARK5 O4 Pro DC FPV Drone

By GEPRC ↗

The GEPRC MARK5 O4 Pro DC FPV Drone is a 230mm-wheelbase flight platform integrating DJI O4 Air Unit Pro imaging, 1960KV motors and a 50A four-in-one ESC. It combines damped camera mounting and replaceable arms with receiver and optional GPS configurations, using a recommended 6S LiPo battery.

Request a quote ↗
GEPRC MARK5 O4 Pro DC FPV drone with emerald green propellers and a front camera
GEPRC MARK5 O4 Pro DC FPV drone with emerald green propellers and a front camera
Flight time6-8 minutes, for reference onlyBased on slow cruising tests; actual duration may vary due to product differences, firmware version, flying style and environment.
ModelGEPRC MARK5 O4 Pro DC FPV Drone
ColorEmerald Green
Receiver and GPS configurations6S PNP, 6S ELRS 2.4G, 6S TBS Nano RX, 6S PNP with GPS, 6S ELRS 2.4G with GPS, 6S TBS Nano RX with GPS
Wheelbase230mmDC version.
Video transmitterDJI O4 Air Unit Pro VTX module

Product overview

The GEPRC MARK5 O4 Pro DC FPV Drone is an equipped FPV flight platform built around the DJI O4 Air Unit Pro video system. Its DC frame has a 230mm wheelbase, quick-release arms with two-screw replacement, and an aluminum camera mount with silicone damping to reduce camera vibration and resonance. A dedicated compartment accommodates the capacitor and buzzer. The camera uses a 1/1.3-inch sensor and supports recording up to 4K 120fps, with real-time video transmission reaching 1080P 100fps.

Flight electronics comprise a GEP-F722-BT-HD V3 controller and GEP-BL32 50A 96K four-in-one ESC, paired with SPEEDX2 2107.5 1960KV motors and Gemfan 5136 propellers. Bluetooth tuning is available through a mobile app. Configuration choices include 6S PNP, ELRS 2.4G and TBS Nano RX, each with or without GPS; the optional GPS is GEP-M10. The DC version uses an XT60EW-M power connector, has a specified weight of 433.4g ± 5g, and takes a recommended LiPo 6S 1050mAh-1550mAh battery.

The supplied package contains the flight platform, a Gemfan 5136 propeller set comprising two clockwise and two counterclockwise propellers, battery straps, anti-slip pads, printed parts, spare fasteners and hand tools. Straps comprise one 15*250mm and two 20*250mm pieces; tools include 1.5mm, 2mm and 3mm L-shaped screwdrivers and an M8 wrench. Flight time is 6-8 minutes, for reference only, based on slow cruising tests. Actual duration may vary with product differences, firmware version, flying style and environment.

Specifications

SpecificationValue & conditions
ModelGEPRC MARK5 O4 Pro DC FPV Drone
ColorEmerald Green
Receiver and GPS configurations6S PNP, 6S ELRS 2.4G, 6S TBS Nano RX, 6S PNP with GPS, 6S ELRS 2.4G with GPS, 6S TBS Nano RX with GPS
Wheelbase230mmDC version.
Video transmitterDJI O4 Air Unit Pro VTX module
CameraDJI O4 Air Unit Pro camera module
AntennaDJI O4 Air Unit Pro Antenna
MotorSPEEDX2 2107.5 1960KV
PropellerGemfan 5136
Flight controllerGEP-F722-BT-HD V3
MicrocontrollerSTM32F722
IMUICM42688-P(SPI)
On-screen displayBetaFlight OSD w / AT7456E chip
Electronic speed controllerGEP-BL32 50A 96K 4IN1 ESC
Power connectorXT60EW-MDC version.
GPSGEP-M10 GPSOptional equipment.
ReceiverPNP / ELRS 2.4G / TBS NanoRX
BatteryLiPo 6S 1050mAh-1550mAhRecommended battery configuration.
Weight433.4g ± 5gDC version.
Flight time6-8 minutes, for reference onlyBased on slow cruising tests; actual duration may vary due to product differences, firmware version, flying style and environment.
Imaging and video capabilities1/1.3-inch image sensor; recording up to 4K 120fps; real-time transmission reaching 1080P 100fpsDJI O4 Air Unit Pro.
Camera support and dampingAluminum camera mount with silicone damping to reduce vibration and resonanceO4 Pro camera mounting.
Arm maintenanceQuick-release arms with two-screw replacement
Electronics compartmentDedicated compartment for the capacitor and buzzer
Tuning interfaceBluetooth tuning through a mobile app
Included platform and accessories1 × GEPRC MARK5 O4 Pro FPV; 1 × Gemfan 5136 set (2CW, 2CCW); 1 × 15*250mm strap; 2 × 20*250mm straps; 2 × battery anti-slip pads; 1 × 3D printouts pack; 1 × spare screw pack; 1 each L-shaped screwdriver in 1.5mm, 2mm and 3mm; 1 × M8 wrenchSupplied package.
Included spare fasteners1 × M5 flange nylon knurled nut; 2 × M2 stainless steel press-fit nuts; 1 × M5*25 stainless steel button head hex screw; 4 × M3*10 button head hex screws; 4 × M3*8 button head hex screws; 2 × M3*8 countersunk hex screws; 2 × M3*5 countersunk hex screwsSupplied spare screw pack.
SOURCE WITH CHINADRONE

Request a quote for GEPRC MARK5 O4 Pro DC FPV Drone

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.