Product overview
The GEPRC MARK5 DC HD O3 FPV is a powered quadcopter for freestyle flying and onboard video recording, supplied with flight electronics, motors and a DJI O3 imaging system. Its 225mm wheelbase combines 2.5mm top and bottom plates with 5mm arms. The camera sits between 7075-T6 aluminum alloy side plates, while dedicated TPU parts secure the O3 transmitter beside an air inlet for cooling. The DC geometry keeps propellers outside the O3 recording view; the listed X configuration allows slight propeller visibility.
The electronics comprise a TAKER F722 BT BL32 50A stack, GEP-F722-BT-HD V3 flight controller and GEP-BL32 50A 96K four-in-one ESC. Bluetooth enables phone-based parameter tuning. A separate capacitor and buzzer compartment and a frame shock absorption design provide accommodation for the onboard electronics. DJI O3 supplies a 155° camera field of view and recording up to 4K at 60FPS. External camera mounting options cover GP action cameras, Naked GP 8/10, Insta 360 GO2 and Caddx Peanut.
Procurement choices pair 4S or 6S power configurations with PNP, TBS Nano RX or ELRS 2.4G options, in Coral Orange or Emerald Green. Motor selection follows voltage: 2450KV for 4S and 1960KV for 6S, both using Gemfan 5136 propellers. Recommended packs are 4S 1300–1800mAh or 6S 1050–1550mAh respectively. The package includes the quadcopter, four propeller pairs, battery straps and silicone pads, printed parts, an action camera holder, fasteners, screwdrivers and an antenna fixing tube. Listed weights include printed parts and differ between the MK5D and MK5X configurations.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer and model | GEPRC MARK5 DC HD O3 Quadcopter |
| Configuration options | 4S PNP, 4S TBS Nano RX, 4S ELRS 2.4G, 6S PNP, 6S TBS Nano RX, 6S ELRS 2.4G |
| Colors | Coral Orange, Emerald Green |
| Frame | GEP-MK5D O3/GEP-MK5X O3 |
| Wheelbase | 225mm |
| Top plate thickness | 2.5mm |
| Bottom plate thickness | 2.5mm |
| Arm plate thickness | 5mm |
| Flight controller | GEP-F722-BT-HD V3 FC |
| MCU | STM32F722 |
| Gyroscope | 42688-P(SPI) |
| OSD | BetaFlight OSD w/AT7456E chip |
| ESC | GEP-BL32 50A 96K 4IN1 ESC |
| Electronics stack | TAKER F722 BT BL32 50A STACK |
| Video transmitter | DJI O3 Air Unit |
| Camera | DJI O3 |
| Propeller | Gemfan 5136 |
| Antenna | DJI O3 antenna |
| Motors | SPEEDX2 2107.5-1960KV (6S Version) / SPEEDX2 2107.5-2450KV (4S Version)1960KV motor for the 6S version; 2450KV motor for the 4S version. |
| Weight | MK5D: 426.0g; MK5X: 404.9g, including 3D printed partsMARK5 HD O3 including 3D printed parts; weights distinguished by MK5D and MK5X configuration. |
| Receiver options | PNP, TBS Nano RX, ELRS 2.4G |
| Recommended battery | LiPo 4S 1300mAh-1800mAh (4S Version) / LiPo 6S 1050mAh-1550mAh (6S Version)4S battery recommendation applies to the 4S version; 6S battery recommendation applies to the 6S version. |
| Camera field of view and recording | 155° FOV; recording up to 4K 60FPSDJI O3 camera. |
| Camera protection and video module mounting | 7075-T6 aluminum alloy camera side plate; dedicated TPU O3 VTX fixing parts and an air inlet cooling port |
| Wireless tuning | Built-in Bluetooth supports wireless parameter tuning from a mobile phone |
| Frame geometry and recording view | DC structure keeps propellers out of the recording view; X structure favors freestyle with propellers slightly visibleDuring O3 internal recording; visibility depends on DC or X frame configuration. |
| Electronics accommodation | Frame shock absorption design with an independent capacitor and buzzer compartment |
| Action camera mounting | Two camera mount designs support GP action cameras, Naked GP 8/10, Insta 360 GO2 and Caddx PeanutUsing the supplied camera mount designs. |
| Included equipment | 1 × MARK5 DC HD O3 Quadcopter; 4 × Gemfan 5136 propeller pairs; 1 × M15x250mm battery strap; 2 × M20x220mm battery straps; 2 × battery silicone pads; 1 × 3D printed parts; 1 × action camera mount holder; 1 × screw set; 1 × screwdriver set; 1 × antenna fixing tubeSupplied package. |
Request a quote for GEPRC MARK5 DC HD O3 FPV
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.