Product overview
The GEPRC MARK5 Analog Freestyle FPV Drone is a powered quadcopter for freestyle flying, supplied with flight electronics, motors and an analog video system. Its GEP-MK5 frame uses a wide X arm layout with a 225mm wheelbase, 2.5mm top and bottom plates, and 5mm arm plates. Aluminum alloy side panels protect the camera, while the fuselage incorporates an anti-shake structure and separate voltage and buzzer compartments. The specified weight is 385.0g for the MARK5 Analog 6S TBS configuration.
The onboard equipment combines a GEP-F722-BT-HD V3 flight controller, STM32F722 MCU, 42688-P gyro and GEP-BL32 50A 96K four-in-one ESC. Analog viewing uses a Caddx Ratel2 camera, RAD VTX 5.8G 1.6W transmitter and GEPRC Momoda antenna. Bluetooth supports mobile-phone parameter adjustment. Motor selection follows the power version: SPEEDX2 2107.5-2450KV for 4S or 2107.5-1960KV for 6S. Recommended LiPo capacities are 1300mAh–1800mAh for 4S and 1050mAh–1550mAh for 6S; setup guidance recommends Betaflight 10.8.0 matched to the corresponding firmware and Factory CLI Dump.
Camera integration uses two types of supplied 3D printed parts supporting GoPro 8/9/10, Naked8/10, Insta360 GO2 and Caddx Peanut cameras. The package contains the quadcopter, HQ Ethix S5 5×4×3 propellers, three battery straps, two battery silicone pads, a camera cage carbon top plate, mounting parts, two action camera holders, screws, screwdrivers and an antenna fixed tube. A battery and action camera are absent from the included-equipment list. Power and receiver selection remain configuration decisions, with PNP and several receiver-equipped options listed.
Specifications
| Specification | Value & conditions |
|---|---|
| Model | GEPRC MARK5 Analog Quadcopter |
| Power versions | 4S, 6S |
| Receiver options | PNP, Frsky R-XSR, TBS Nano RX, ELRS 2.4G, ELRS 915M |
| Frame | GEP-MK5 |
| Wheelbase | 225mm |
| Top plate thickness | 2.5mm |
| Bottom plate thickness | 2.5mm |
| Arm plate thickness | 5mm |
| Flight controller | GEP-F722-BT-HD V3 FC |
| MCU | STM32F722 |
| Gyro | 42688-P |
| OSD | BetaFlight OSD w/AT7456E chip |
| ESC | GEP-BL32 50A 96K 4IN1 ESC |
| Video transmitter | RAD VTX 5.8G 1.6W |
| FPV camera | Caddx Ratel2 |
| Charge connector | XT60 |
| Propeller | HQ Ethix S5 5×4×3 |
| Motors | SPEEDX2 2107.5-1960KV (6S Version) / SPEEDX2 2107.5-2450KV (4S Version)6S Version / 4S Version, respectively. |
| Weight | 385.0gMARK5 Analog 6S TBS. |
| Receiver specification | PNP, TBS Nano RX, ELRS 915, ELRS 2.4G |
| Recommended battery | LiPo 4S 1300mAh-1800mAh (4S Version) / LiPo 6S 1050mAh-1550mAh (6S Version)4S Version / 6S Version, respectively. |
| Propeller revision | July 22nd, 2022: propeller changed from GEMFAN Freestyle 4S to HQ Ethix S5 5×4×3. |
| Flight controller revision | May 6th, 2024: flight controller changed from GEP-F722-HD-BT V2 to GEP-F722-BT-HD V3 FC. |
| Betaflight setup recommendation | Betaflight 10.8.0 is recommended with the corresponding FC firmware and Factory CLI Dump to avoid setting errors.Match the corresponding FC firmware and Factory CLI Dump. |
| Antenna | GEPRC Momoda 5.8G MMCX RHCP 100mm |
| Physical architecture | Wide X arm layout |
| Camera protection | Aluminum alloy side panels protect the camera. |
| Parameter adjustment | Built-in Bluetooth supports parameter adjustments from a mobile phone. |
| Action camera integration | Two types of 3D printed parts support GoPro 8/9/10, Naked8/10, Insta360 GO2 and Caddx Peanut cameras.Using the supplied 3D printed mounting parts. |
| Included equipment | 1 x MARK5 Analog Quadcopter; 4 x HQ Ethix S5 5×4×3 propellers (pair); 1 x M15x250mm battery strap; 2 x M20x220mm battery straps; 2 x battery silicone pads; 1 x camera cage carbon top plate; 1 x 3D print mountings combination; 2 x action camera mount holders; 1 x set of screws; 1 x set of screwdrivers; 1 x antenna fixed tube.Supplied package. |
Request a quote for GEPRC MARK5 Analog Freestyle FPV Drone
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.