ChinaDroneRequest a quote →

GEPRC LINKFLOW 915M V2 TX Module

The GEPRC LINKFLOW 915M V2 TX Module is an ExpressLRS transmitter module with a standard JR bay design, 868/915MHz operation and up to 2000mW RF output. It combines an LR1121 RF chipset, active fan cooling and a TCXO, with peripheral connectivity, a UART port and USB or WiFi firmware updates.

GEPRCRC transmitters & receivers
Weight
60 g

Get a free quote

Product overview

The GEPRC LINKFLOW 915M V2 TX Module is an ExpressLRS transmitter module built around Semtech’s third-generation LR1121 RF chipset, with an ESP32 main chip and an ESP32-C3 backpack chip. Its standard JR bay form factor incorporates an SMA antenna connector. Operation covers 915MHz FCC/868MHz EU, with up to 2000mW RF output power. Refresh rates are 50Hz–250Hz in LoRa mode and 1000Hz in FSK mode. A temperature-compensated crystal oscillator supports frequency stability as temperatures vary, while a built-in high-speed fan provides active cooling.

The integrated backpack chip supports peripheral connectivity, and a reserved UART port enables repeater use or high-power receiver configurations. An XT30 connector accepts 2–6S external battery power, RGB LEDs indicate system status, and firmware updates are supported through USB or WiFi. The module uses GEPRC LINKFLOW 900M TX V2 firmware and weighs 60g without the antenna. Supplied equipment comprises one LINKFLOW 915M V2 TX Module, one 915MHz T antenna, one GH1.25 3pin cable, one metal dust filter mesh and one user manual.

Links & controllers

Specifications

GEPRC LINKFLOW 915M V2 TX Module specifications
SpecificationValue & conditions
ModelGEPRC LINKFLOW 915M V2 TX Module
PlatformExpressLRS open-source project
Operation Bands915MHz FCC/868MHz EU
Module Bay TypeJR Bay
Main ChipESP32
Backpack ChipESP32-C3
RF ChipLR1121
Output PowerUp to 2000mW
OscillatorTCXO
Refresh Rate50Hz-250Hz(LoRa),1000Hz(FSK)LoRa; FSK.
Antenna ConnectorSMA
Wi-FiSupported
RGB IndicatorSupported
External Power2–6SExternal battery input.
Weight60gWithout antenna.
FirmwareGEPRC LINKFLOW 900M TX V2
CoolingActive cooling with a built-in high-speed fan
UART PortReserved UART port for repeater use or high-power receiver configuration
Power ConnectorXT30
Firmware Update MethodsUSB and WiFi
Peripheral ConnectivityIntegrated backpack chip for peripheral connectivity
Supplied Equipment1 x LINKFLOW 915M V2 TX Module; 1 x 915MHz T Antenna; 1 x GH1.25 3pin Cable; 1 x Metal Dust Filter Mesh; 1 x User manual

Related guides