Product overview
The GEPRC GEP-PX3 Frame is an airframe for miniature quad builds intended for freestyle and competition. Its True X structure uses a one-piece 3mm 3K carbon-fiber chassis, a 2mm upper deck and 1mm side plates. The frame weighs 24g and measures 110*115mm, with a 140mm motor-to-motor distance and provision for 3-inch propellers. Chamfered edges finish the carbon chassis, while precision CNC-machined aircraft-grade 7075 aluminum provides lens protection. YFS screws have 12.9 grade strength, non-slip teeth and anti-rust properties.
Camera positioning supports a lens angle from 22 to 55 degrees and forward or backward adjustment. A one-piece 3D-printed module holds the antenna and rear LED. Upper or lower battery placement and two types of battery non-slip pads provide mounting options. Recommended build components are F3/F4 flight controllers, 1106/1107/1108/1206 motors, 12A-20A ESCs, 3inch propellers and batteries from 3S 450mAh to 4S 650mAh. These are recommendations for the airframe build. The package listing specifies 1x GEP-PX2.5, creating an unresolved variant discrepancy with the GEP-PX3 identity.
Specifications
| Specification | Value & conditions |
|---|---|
| Model | GEP-PX3 |
| Product type | GEPRC GEP-PX3 Frame; airframe |
| Weight | 24g |
| Motor-to-motor distance | 140mm |
| Propeller size | 3 inch |
| Dimensions | 110*115mm |
| Bottom plate thickness | 3mm |
| Top plate thickness | 2mm |
| Side plate thickness | 1mm |
| Flight controller | F3/F4Recommended configuration. |
| Motors | 1106/1107/1108/1206Recommended configuration. |
| ESC | 12A-20ARecommended configuration. |
| Propeller | 3inchRecommended configuration. |
| Battery | 3S 450mAh ~ 4S 650mAhRecommended configuration. |
| Frame layout and purpose | True X layout intended for freestyle and competition |
| Chassis construction | One-piece 3mm 3K carbon-fiber chassis with 2mm upper deck |
| Lens protection | Precision CNC-machined aircraft-grade 7075 aluminum lens protection |
| Chassis edge finish | Chamfered carbon-fiber chassis edges |
| Lens adjustment | 22 to 55 degree lens angle adjustment, with forward and backward adjustment |
| Antenna and rear LED mounting | One-piece 3D-printed module for antenna and rear LED |
| Battery mounting and pads | Upper or lower battery placement; two types of battery non-slip pads |
| Fasteners | YFS screws with 12.9 grade strength, non-slip teeth and anti-rust properties |
| Listed package contents | 1x GEP-PX2.5 |
Request a quote for GEP-PX3 Frame
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
