ChinaDrone.Request a quote ↗
COMPONENT

GEPRC GEP-F722 HD Flight Controller

By GEPRC ↗

The GEPRC GEP-F722 HD Flight Controller is a 36x36mm UAV control board built around an STM32F722RET6 MCU and MPU6000 IMU. It supports DJI FPV integration, several receiver protocols and 3-6S LiPo input. The supplied component package includes the controller, mounting grommets, an ESC cable and a DJI cable.

Request a quote ↗
GEPRC GEP-F722 HD flight controller board with USB-C port and four mounting holes
GEPRC GEP-F722 HD flight controller board with USB-C port and four mounting holes
ProductGEPRC GEP-F722 HD Flight Controller
MCUSTM32F722RET6
IMUMPU6000(SPI)
BlackBox16Mb onboard Flash
OSDBetaFlight OSD w/ AT7456E chip
BarometerBMP280

Product overview

The GEPRC GEP-F722 HD Flight Controller provides flight-control electronics for a UAV build, with an STM32F722RET6 MCU and an MPU6000 IMU connected through SPI. Its board measures 36x36mm, with 4mm holes reduced to 3mm using grommets. The electronics combine a BMP280 barometer, 16Mb of onboard BlackBox flash and BetaFlight OSD using an AT7456E chip. Power requirements are 3-6S LiPo, with 5V and 9V BEC outputs and an integrated LC filter. The firmware target is GEPRCF722.

Integration connections include Type-C USB, four UARTs and direct connection to the DJI Digital FPV System, with DJI FPV Air Unit support. The controller lists Sbus, PPM, CRSF, DSMX and iBus protocols, alongside named receiver families and most SBUS receivers. A BLheli_32 50A 4-in-1 ESC is listed for integration. The supplied package consists of one flight controller, four M4-to-M3 silicone grommets, one ESC cable and one DJI cable, making this a controller component package for assembly into a UAV.

Specifications

SpecificationValue & conditions
ProductGEPRC GEP-F722 HD Flight Controller
MCUSTM32F722RET6
IMUMPU6000(SPI)
BlackBox16Mb onboard Flash
OSDBetaFlight OSD w/ AT7456E chip
BarometerBMP280
BEC output5V,9V BEC
Firmware targetGEPRCF722
Board size and hole diameters36x36mm board; 4mm hole diameter, 3mm with grommetsWith grommets, the stated hole diameter is 3mm.
Power input3-6S LiPo
USB interfaceType-C USB
Power filteringIntegrated LC filter
UART count4
DJI integrationDirect connection to the DJI Digital FPV System
FPV air unit supportDJI FPV Air Unit supported
ESC integrationBLheli_32 50A 4-in-1 ESC listed for integration
Supported receiver protocolsSbus, PPM, CRSF, DSMX, iBus
Supported receiversFrsky XM/XM+/R-XSR; Futaba; DSM/DSMX; FlySky; TBS Crossfire; AC900; most receivers supporting SBUS
Included flight controller1x GEP-F722-HD Flight ControllerSupplied configuration.
Included mounting grommets4x silicone grommets, M4 to M3Supplied configuration.
Included ESC cable1x ESC cableSupplied configuration.
Included DJI cable1x DJI cableSupplied configuration.
SOURCE WITH CHINADRONE

Request a quote for GEPRC GEP-F722 HD Flight Controller

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
RadioLink PIX6 flight controller with labeled connection ports
Flight control & navigation

RadioLink PIX6

By RadioLink

The RadioLink PIX6 is an open-source flight controller supporting APM and PX4 firmware for aircraft and vehicle integration. It combines dual gyroscopes, mechanical and software vibration damping, integrated OSD, and extensive peripheral connections. The supplied controller package includes one selectable 2-12S power module, safety accessories, a memory card, and connection cables.