Product overview
The GEPRC GEP-Elegant PNP is an assembled FPV quadcopter for freestyle flying and competition. Its 230mm architecture combines a GEP-KHX5 frame, full 3K twill carbon fiber and CNC 7075 components. The bottom plate is 2mm thick, the side plates are 1.5mm and the arm plates are 4mm. Battery placement is intended to center the mass and improve flight balance. At 348 grams without battery or propellers, the stated weight excludes two components needed for the flying configuration.
The integrated electronics center on a SPAN F4 Tower AIO with an STM32F405 MCU, MPU6000 and four 40A BLHeli_s ESC channels supporting Dshot 150/300/600. GR2306 2450kv motors drive GEP5040 three-blade propellers. The FPV equipment includes a Runcam Swift2 camera with a 2.1mm lens and a 48-channel 5.8GHz video transmitter with OFF, 25, 200 and 600mW settings. Input support is 2-5S LiPo. Integration is organized around these installed components.
The PNP configuration supplies a flight platform with installed electronics, but requires a receiver; the Frsky R-XSR belongs only to the BNF configuration. Accessories include battery straps, a spare arm and two Pagoda2 RHCP MMCX antennas, one installed. The propeller specification lists 10 pairs, while the package list separately states 10 propellers. Suggested flying equipment includes a Frsky X9d-type radio, FatShak V2-type goggles and a suitable battery. Every firmware refresh requires the specified motor resource mapping because the ESC is installed backwards.
Specifications
| Specification | Value & conditions |
|---|---|
| Product | GEPRC GEP-Elegant PNP |
| Purpose | Competition and freestyle quadcopter |
| Carbon | Full 3K carbon fiber Twill |
| CNC | High precision CNC 7075 |
| MCU | STM32F405 |
| MPU | MPU6000 |
| ESC | 40A * 4 BLHeli_s; Dshot 150/300/600; supports 2~5S LiPo2~5S LiPo. |
| VTX | 5.8GHz; 48 channels; OFF/25/200/600mW |
| Wheelbase | 230mm |
| Firmware | Betaflight_3.2.5_OMNIBUSF4SD |
| Input voltage | Supports 2-5S LiPo |
| Motor | GR2306 2450kv |
| Propeller specification | GEP5040*3 (10 pairs) |
| Weight | 348 gramsWithout battery or props. |
| Frame | GEPRC GEP-KHX5 |
| Bottom plate thickness | 2mm |
| Side plate thickness | 1.5mm |
| Arm plate thickness | 4mm |
| Flight controller | SPAN F4 Tower AIO |
| Remote control suggestion | Frsky X9d or similar |
| Goggle suggestion | FatShak V2 or similar |
| Battery recommendations | Novice: 3s 1300-1800mah; professional: 4s 1300mah-1800mah3s recommendation for novices; 4s recommendation for professional flying. |
| Receiver configuration | PNP supplied without a receiverPNP without receiver; Frsky R-XSR included only with BNF. |
| FPV camera | Runcam Swift2 with 2.1mm lens |
| Supplied quadcopter and accessories | 1× Elegant BNF/PNP quadcopter; 10× GEP5040-3 propeller; 3× battery strap; 1× spare arm |
| Supplied antennas | 2× Pagoda2 RHCP MMCX antennasOne antenna installed. |
| Required motor resource mapping | Apply resource MOTOR 1 A03; resource MOTOR 2 A02; resource MOTOR 3 B00; resource MOTOR 4 B01; saveAfter every firmware refresh; ESC installed backwards. |
Request a quote for GEP-Elegant PNP
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.