Product overview
The GEPRC GEP-CL35 V2 Frame is an airframe kit for a guarded 3.5-inch UAV build. Its physical layout combines carbon plates, injection-molded propeller guards and 7075 aluminum reinforcing columns. Motor-to-motor distance is 142mm, and the stated weight is 133.7g. A bottom-mounted, shock-absorbing camera gimbal is intended to reduce camera IMU resonance and shaking. Battery retention uses a strap secured through aluminum fixing parts, while an XT60E1-M power connector integrates with the carbon plate.
Component selection must fit the frame’s defined installation interfaces: a 25.5mm x 25.5mm flight controller pattern, 20mm x 20mm or 25mm x 25mm video transmitter patterns, and 12mm x 12mm motor mounting. Camera installation space is 20mm, and the propeller guards have a 95mm internal diameter for the specified 3.5-inch propellers. The frame supports O3 video transmitter installation, with guard provisions for O3 Air Unit storage-card and USB access. These dimensions establish the principal integration constraints.
The supplied configuration centers on structural parts and assembly accessories, rather than a complete flight platform. It includes carbon plates, a molded guard, fasteners, aluminum columns, camera isolation rubbers and printed mounts for the camera, receiver, antennas, capacitor and power plug. Power wiring, three 80mm video transmitter extension cables, battery straps, non-slip pads and assembly tools are also included. The included main carbon plate is listed as 3.0mm; the separate arm-plate specification is 3.5mm, so these are distinct stated dimensions.
Specifications
| Specification | Value & conditions |
|---|---|
| Model | GEP-CL35 V2 |
| Motor-to-motor distance | 142mm |
| Top plate thickness | 2mm |
| Bottom plate thickness | 1.5mm |
| Arm plate thickness | 3.5mm |
| Flight controller mounting pattern | 25.5mm x 25.5mm |
| Video transmitter mounting patterns | 20mm x 20mm/25mm x 25mm |
| Motor mounting pattern | 12mm x 12mm |
| Camera installation space | 20mm |
| Propeller guard internal diameter | 95mm |
| Suitable propeller size | 3.5 inch propeller |
| Weight | 133.7g |
| Product type and manufacturer | GEPRC GEP-CL35 V2 airframe kit |
| Video transmitter integration | Supports mounting an O3 video transmitter |
| Camera isolation architecture | Bottom-mounted shock-absorbing camera gimbal intended to reduce camera IMU resonance and shaking |
| Frame and guard construction | Carbon plate and injection-molded propeller guards reinforced with 7075 aluminum columns |
| Battery retention | Strap retention with 7075 aluminum fixing parts |
| Power connector arrangement | XT60E1-M power plug integrated with the carbon plate |
| Data access provisions | Propeller guard provides storage-card and USB access for the O3 Air UnitWith an O3 Air Unit installed. |
| Carbon plates | 1 main carbon plate, 3.0mm; 1 top plate, 2.0mm; 1 bottom plate, 1.5mmSupplied kit contents. |
| Battery fixing parts and structural columns | 2 battery strap fixing aluminum parts; 2 7075 mesh aluminum columns M2*11.5*4; 4 7075 mesh aluminum columns M2*25*3.3Supplied kit contents. |
| Printed integration mounts | 1 each: two-hole camera mount, four-hole camera mount, receiver mount, T-shaped antenna mount, VTX antenna mount, capacitor mount, power plug printed part and GP camera base mountSupplied kit contents. |
| Molded guard and vibration isolation parts | 1 injection-molded propeller guard; 4 flight controller vibration-damping rubbers M2*6; 6 camera vibration-damping rubbers; 4 camera gimbal shock-absorbing rubber rings M3*10.5*10.25Supplied kit contents. |
| Power and video accessories | 1 XT60E1-M power plug with cable; 4 motor hubs M7*15mm; 3 5.8G VTX extension cables, 80mm; 7 heatshrink tubesSupplied kit contents. |
| Additional mounting and battery accessories | 1 naked GP camera base mount with 2 round-head M2*12 screws and 2 M2 press rivet nuts; 4 BEC pads; 2 battery non-slip pads; 2 receiver antenna sticks, 100mm; 1 battery strap M20*250; 1 battery strap M20*220Supplied kit contents. |
| Assembly tools | 1 each: 1.5MM, 2.0MM and 3.0MM L-shaped screwdrivers; 1 M5 wrenchSupplied kit contents. |
Request a quote for GEP-CL35 V2 Frame
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
