Product overview
The GEPRC DarkStar25 O4 Pro CineWhoop Quadcopter is a compact FPV flight platform for indoor flying, outdoor freestyle and aerial recording. Its GEP-DS25 frame has a 115mm wheelbase and a 2.5mm main plate, with added side protection and an arrangement intended to improve internal space, cooling and maintenance access. Five-point damping supports steadier footage, while silicone dampers use retention screws to resist separation during crashes. The structure opens with five screws, and the battery connector sits underneath for access.
The installed electronics combine a TAKER F722 35A 32Bit AIO flight system with SPEEDX2 1404 4600KV motors and HQProp DT63MMX3 V2 propellers. DJI O4 Air Unit Pro camera, transmitter and antenna hardware provides the imaging configuration, including 4K/120fps recording. Receiver choices are PNP with a built-in receiver or ELRS 2.4GHz, each offered with or without GPS; the optional module is the GEP-M10 Nano. The ELRS2.4G version weighs 180g. Recommended power is a LiPo 4S 700mAh–850mAh battery connected through XT30U-M.
The package supplies a drone with covers, battery mounting accessories, two propeller pairs, tools, a binding pin, a Type-C cable and spare damping balls and screws. A flight battery is recommended separately and is absent from the included-equipment list. Flight duration is 6min 20sec–8min 30sec under slow cruising conditions and varies with flight style. Replacing the installed O4 Air Unit Pro with an O4 Wide Air Unit requires attention to its 3.7–13.2V input: power it from the 5V pad or install an external BEC module.
Specifications
| Specification | Value & conditions |
|---|---|
| Configuration options | PNP, ELRS 2.4G, PNP With GPS, ELRS 2.4G With GPS |
| Model | DarkStar25 O4 Pro |
| Frame | GEP-DS25 |
| Main plate thickness | 2.5mm |
| Wheelbase | 115mm |
| Flight system | TAKER F722 35A 32Bit AIO |
| MCU | STM32F722 |
| Gyroscope | ICM42688-P |
| Firmware | GEPRC_F722_AIO |
| Flash memory | 16MB |
| ESC | 32Bit 35A |
| Motor | SPEEDX2 1404 4600KV |
| Propellers | HQProp DT63MMX3 V2 |
| Battery connector | XT30U-M |
| GPS | Optional GEP-M10 NanoOptional GPS configuration. |
| Video transmitter | DJI O4 Air Unit Pro VTX Module |
| Camera | DJI O4 Air Unit Pro Camera Module |
| Antenna | DJI O4 Air Unit Pro Antenna |
| Receiver | PNP (built-in receiver) / ELRS 2.4GHzPNP or ELRS receiver configuration. |
| Weight | 180gELRS2.4G version. |
| Battery recommendation | LiPo 4S 700mAh – 850mAhRecommended battery configuration. |
| Flight time | 6min 20sec – 8min 30secSlow cruising conditions; actual time depends on flight style. |
| Replacement video unit power requirement | Use the 5V pad to power the O4 Wide Air Unit or install an external BEC module.Replacing the O4 Air Unit Pro with the O4 Wide Air Unit, which has an input voltage of 3.7–13.2V. |
| Recording | 4K/120fps recordingDJI O4 Pro system. |
| Frame integration and protection | Frame designed to improve internal space, heat dissipation and maintenance, with added side protection and optional GPS support; intended for indoor flight and outdoor freestyle. |
| Damping and service access | Five-point damping; silicone dampers with retention screws to prevent separation during crashes; disassembly using 5 screws. |
| Battery connector placement | Bottom-mounted battery connector. |
| Included equipment | 1 × DarkStar25 Drone; 1 × Top Cover; 1 × Canopy; 1 × Battery Pad; 2 × HQProp DT63MMX3 V2 propeller pairs; 1 × 15×150mm Battery Strap; 1 × L-shaped Screwdriver (1.5mm); 2 × Battery Anti-slip Pads; 1 × Damping Ball Punch Tool; 1 × Binding Pin; 1 × Type-C Cable.Supplied package. |
| Included spares | 5 × Camera Mount Damping Balls; 4 × M2*4.5 Button Head Screws; 4 × M2*7 Button Head Screws; 4 × M2*6 Countersunk Screws; 4 × M2*6 Button Head Screws.Supplied spare parts. |
Request a quote for GEPRC DarkStar25 O4 Pro CineWhoop Quadcopter
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.