Product overview
The GEPRC DarkStar20 HD O3 Cinewhoop Quadcopter is a compact flight platform for cinematic FPV work in small spaces, with indoor shooting and outdoor flying as its stated roles. Its GEP-DS20 frame has a 90mm wheelbase, an injection-molded fuselage and multidirectional triangular bracing. A frame-protected battery compartment accommodates the battery, while an adjustable protective cover shields the camera during overturns. The battery-excluded weight is 85.5g; the PNP configuration has a separate specification of 85g ± 1g.
The electronics combine a TAKER F411-12A-E 1-2S AIO flight system, STM32F411CEU6 processor, ICM 42688-P gyro and Bluejay 8Bit 12A ESC. Integrating the ELRS 2.4G receiver into the AIO reduces the space occupied by receiving equipment in that configuration. Receiver choices also include PNP with the O3 Air Unit’s built-in receiver and TBS Nano RX. Imaging uses an O3 Camera and O3 Air Unit, with a 5.8G UFL antenna and onboard recording up to 4K 120fps.
Propulsion uses SPEEDX2 1102 10000KV motors, with HQ Prop D2*1.9*4GR-PC propellers specified for the aircraft. The recommended battery is a 2S 500mah LiPo. The stated flight time of 4 minutes 40 seconds applies to indoor low-speed cruising, which limits its use as an endurance planning figure for other flight conditions. The supplied package contains the quadcopter, HQProp DT51mm*4 propellers listed as two pairs, a plum screwdriver, a set of screws and a keychain.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer and product | GEPRC DarkStar20 HD O3 Cinewhoop Quadcopter |
| Purpose | Cinematic FPV quadcopter for indoor shooting and outdoor flying. |
| Physical architecture | Lightweight injection-molded fuselage with multidirectional triangular frame bracing. |
| Receiver options | PNP, ELRS 2.4G, TBS Nano RX |
| Model | DarkStar20 O3 Cinewhoop Quadcopter |
| Frame | GEP-DS20 Frame |
| Wheelbase | 90mm |
| FC system | TAKER F411-12A-E 1-2S AIO |
| MCU | STM32F411CEU6 |
| Gyro | ICM 42688-P |
| OSD | Betaflight OSD w/AT7456E chip |
| ESC | Bluejay 8Bit 12A |
| VTX | O3 Air Unit |
| Camera | O3 Camera |
| Antenna | 5.8G UFL antenna |
| Motor | SPEEDX2 1102 10000KV |
| Propeller | HQ Prop D2*1.9*4GR-PC |
| PNP weight | 85g ± 1gPNP configuration with built-in O3 Air Unit receiver. |
| Receiver | PNP / ELRS2.4G / TBS Nano RX |
| Recommended battery | LiPo 2S 500mah |
| Flight time | 4′40″Indoor low-speed cruising. |
| Battery-excluded weight | 85.5gWithout batteries. |
| Video recording | Up to 4K 120fpsO3 Air Unit onboard recording. |
| Receiver integration | ELRS 2.4G receiver integrated into the AIO flight system to reduce occupied space.ELRS 2.4G configuration. |
| Battery compartment | Frame-protected battery compartment. |
| Camera protection | Adjustable camera protective cover intended to protect the camera during overturns. |
| Supplied configuration | Flight platform supplied as one DarkStar20 cinewhoop quadcopter, rather than an airframe-only kit. |
| Included accessories | 2 x HQProp DT51mm*4 propellers, listed as two pairs. |
| Included tools and hardware | 1 x plum screwdriver, 1 x set of screws, 1 x keychain |
Request a quote for GEPRC DarkStar20 HD O3 Cinewhoop Quadcopter
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.