Product overview
The GEPRC Crown Analog Cinewhoop is a powered quadcopter configured for analog FPV and aerial camera work, including indoor flying. Its GEP-CW3 frame has a 156mm motor-to-motor distance and combines a separate bottom plate with injection-molded guards and EVA damping protection. A CNC aluminum-alloy camera mount forms part of the physical architecture. For recording-camera integration, it supports GP lite and GP6/7/8/9 cameras, with a shock-absorbing 3D-printed mount described for GP6/7/8/9 installations.
The current electronics configuration uses an F7-BT-HD V2 flight controller with an STM32F722 MCU, a six-axis gyro and BetaFlight OSD with an AT7456E chip. A 45A DSHOT 600 ESC accompanies a flight-system mounting pitch of 30.5mm × 30.5mm. The analog video equipment comprises a Caddx Ratel V2 camera, a wire-connected 5.8G transmitter rated at 25–600mW and a GEPRC Momoda RHCP antenna. Receiver choices are PNP, Frsky RXSR and TBS Nano RX.
Procurement requires choosing between 4S and 6S configurations: their upgraded 2004 motors use 3150KV and 2150KV respectively, both with M5 shafts. Recommended batteries are 4S 1300–1550mAh or 6S 1050–1100mAh. Weight is 281 g without batteries. Flight duration is 6–7 minutes with a GP camera and 8–10 minutes without one. The supplied flight platform comes with propeller pairs, battery pads and straps, antenna bushings, a Type-C interface, a camera adjustment board and tools; the inclusion list specifies no battery or recording camera.
Specifications
| Specification | Value & conditions |
|---|---|
| Product | GEPRC Crown Analog Cinewhoop |
| Purpose | Cinewhoop quadcopter for indoor flight and aerial photography around people. |
| Frame | GEP-CW3 |
| Motor-to-motor distance | 156mm |
| Flight controller | F7-BT-HD V2 |
| Flight-controller revision history | June 9th, 2022: SPAN F722 HD FC introduced; August, 2022: replaced by F7-BT-HD V2 FC. |
| MCU | STM32F722 |
| Gyro | 6-Axis |
| OSD | BetaFlight OSD w/ AT7456E chip |
| ESC | BLHe li-S DSHOT 600 45A |
| Electronics mounting hole pitch | 30.5mm * 30.5mm |
| Video transmitter | 5.8G 25~600mW VTXWire-connected version. |
| FPV camera | Caddx Ratel V2 |
| Propeller | 3045*3 |
| Antenna | GEPRC Momoda 5.8g RHCP |
| 4S motors | Upgraded 2004 3150KV motors with M5 shaftCrown 4S configuration. |
| 6S motors | Upgraded 2004 2150KV motors with M5 shaftCrown 6S configuration. |
| Weight | 281 gWithout batteries. |
| Receiver options | PNP, Frsky RXSR, TBS Nano RX |
| Battery configurations | 4S, 6S |
| Recommended 4S battery | 4S 1300~1550mAh4S configuration. |
| Recommended 6S battery | 6S 1050~1100mAh6S configuration. |
| Flight time with camera | 6-7 minutesWith GP camera. |
| Flight time without camera | 8-10 minutesWithout GP camera. |
| Action-camera compatibility | GP lite and GP6/7/8/9 |
| Protective architecture | Separate bottom plate, injection-molded guard and EVA protective damping sponge. |
| Camera mounting | CNC aluminum-alloy camera mount |
| Action-camera mount | 3D-printed mount with shock absorptionGP6/7/8/9 motion-camera installation. |
| Supplied configuration | 1x Crown Analog Cinewhoop; 4x pairs of 3045*3 props; 2x battery pads; 2x antenna bushings; 1x Type-C interface; 1x L-shaped screwdriver; 1x camera adjustment board; 2x battery straps; 1x wrench. |
Request a quote for GEPRC Crown Analog Cinewhoop
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.