Product overview
The GEPRC Crocodile Baby 4 Analog Long Range FPV (New F722 AIO) is supplied as an assembled and adjusted 4-inch quadcopter for micro long-range FPV flying. Its GEP-CB4 frame has a 174mm wheelbase, a 1.5mm top plate, a 2.0mm bottom plate and 2.5mm arm plates. GR1404 2750KV motors drive Gemfan 4024 propellers. Analog imaging equipment combines a CADDX RATEL 2 camera with a STABLE F4 600mW video transmitter and a GEPRC Momoda RHCP antenna.
The GEP-F7-35A AIO flight controller incorporates an STM32F722RET6 MCU, a six-axis gyro and BetaFlight OSD with an AT7456E chip. Electrical integration includes an XT30 connector, Type-C USB interface and integrated LC filter. Power input is 4S LiPo, with recommended batteries spanning 4S 650mAh–1300mAh LiPo or 4S 3000mAh Li-ion. Selectable receiver options are PNP, Frsky XM+ and TBS Crossfire Nano RX. Accessories include propeller pairs, silicone pads, screwdrivers, spare arms, battery straps, an antenna protection tube and a camera adjustment board.
The GEP-M10 GPS supports Betaflight rescue, which can return the aircraft toward the approximate base position after signal loss or loss of video-transmitter control. Rescue does not land automatically; the pilot must land manually after signal recovery. GEPRC Finder continues sounding when the aircraft is lost and battery power disconnects. Flight time exceeds 28 minutes when equipped with a GEPRC Lion VTC6 3000mAh battery. Weight is 150 g and dimensions are 300 × 200 × 100 mm; the separate 242g weight applies to the HD configuration with a 4S 750mAh battery.
Specifications
| Specification | Value & conditions |
|---|---|
| Model | GEPRC Crocodile Baby 4 Analog Long Range FPV(New F722 AIO) |
| Weight | 150 g |
| Dimensions | 300 × 200 × 100 mm |
| Selectable receiver options | PNP, Frsky XM+, TBS Crossfire Nano RX |
| GPS revision | July 27, 2023: GPS changed from GEP-M8U to GEP-M10. |
| Frame | GEP-CB4 |
| Wheelbase | 174mm |
| Top plate thickness | 1.5mm |
| Bottom plate thickness | 2.0mm |
| Arm plate thickness | 2.5mm |
| Camera | CADDX RATEL 2 |
| Flight controller | GEP-F7-35A (New AIO) |
| MCU | STM32F722RET6 |
| Gyro | 6-Axis |
| OSD | BetaFlight OSD w/ AT7456E chip |
| Power input | 4S LiPo |
| Video transmitter | STABLE F4 5.8g 600mW VTX |
| Propellers | Gemfan 4024 |
| Antenna | GEPRC Momoda 5.8g RHCP |
| Motors | GR1404 2750KV |
| GPS | GEP-M10 |
| HD configuration weight | 242gHD configuration including 4S 750mAh battery. |
| Receiver specification | PNP(with DJI Receiver) / Frsky XM+ / Frsky R9mm / TBS Nano RXPNP configuration specified with DJI receiver. |
| Recommended batteries | 4S 650mAh – 1300mAh LiPo or 4S Li-ion 3000mAh |
| Electrical interfaces and filtering | XT30 connector; Type-C USB interface; integrated LC filter. |
| Flight time | More than 28 minutes.Equipped with GEPRC Lion VTC6 3000mAh battery. |
| GPS rescue limitation | Betaflight rescue returns toward the approximate base position; it does not land automatically.Emergency rescue after signal loss or loss of video-transmitter control; manual landing required after signal recovery. |
| Recovery beeper | Integrated GEPRC Finder continues sounding.Aircraft lost and battery power disconnected. |
| Supplied configuration | Assembled and adjusted 4-inch long-range FPV quadcopter. |
| Included equipment | 1× Crocodile Baby 4″ Analog quadcopter; 4× pairs of Gemfan 4024 props; 2× silicone pads; 3× L-shaped screwdrivers; 1× antenna protection tube; 1× spare front arm; 1× spare rear arm; 2× 12*180mm battery straps; 1× 15*200mm battery strap; 1× camera adjustment board. |
Request a quote for GEPRC Crocodile Baby 4 Analog Long Range FPV(New F722 AIO)
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.