ChinaDroneRequest a quote →
GEPRC CineStyle 4K F722 quadcopter with dual front cameras and four propellers

CineStyle 4K F722

The GEPRC CineStyle 4K F722 is a quadcopter for aerial photography, combining 4K recording with a low-latency 1200TVL FPV camera. Carbon fiber and aluminum construction, GEP-GR1507 3600KV motors and F722 flight control form its hardware platform. Its camera view excludes propellers and guards, and recording parameters are adjustable through Wi-Fi and an app.

GEPRC

Get a free quote

Product overview

Designed for aerial photography, the GEPRC CineStyle 4K F722 combines a Caddx Tarsier camera with a dual camera system for HD recording and FPV viewing. Recording modes span 4K@30fps, 2.7K@60fps and 1080P@90fps, while the 1200TVL FPV camera provides latency within 10ms. Video recording parameters can be adjusted through Wi-Fi and an app. The camera view keeps propellers and their protection frames out of the footage. The frame uses full 3K carbon fiber and 7075 aviation aluminum with high-precision CNC construction.

GEP-GR1507 3600KV motors drive GEP3042-3 propellers, with a 4S 850mAh battery recommended. The STABLE PRO F7 35A flight controller incorporates dual ICM20689 SPI sensors, 32Mb onboard flash and BetaFlight OSD. Its BLheli_32 4-in-1 ESC supports 2–6S batteries, with 35Amps continuous and 45Amps burst current. Receiver choices include PNP without a receiver, Frsky XM+, Frsky R-XSR, TBS Crossfire Nano RX and Flysky FS-A8S V2. Supplied equipment comprises the quadcopter, 10 pairs of GEP-3042 props, three battery straps and one Momoda RHCP SMA antenna.

Specifications

SpecificationValue & conditions
ProductGEPRC CineStyle 4K F722 quadcopter
Receiver optionsPNP(Without Receiver), Frsky XM+, Frsky R-XSR, TBS Crossfire Nano RX, Flysky FS-A8S V2PNP configuration supplied without receiver.
HD video recording4K@30fps, 2.7K@60fps, 1080P@90fps
Dual camera system1200TVL FPV camera; latency within 10ms
Black box32Mb onboard Flash
Frame constructionFull 3K carbon fiber, 7075 aviation aluminum, high-precision CNC
MotorGEP-GR1507 3600KV
PropellerGEP3042-3
Flight controller modelSTABLE PRO F7 35A
Flight controller MCUSTM32F722RET6
Flight controller IMU2x ICM20689(SPI)
OSDBetaFlight OSD with AT7456E chip
Flight controller firmware targetEXF722DUAL
Flight controller dimensions and mounting26x26mm board, 20mm mounting holes (M2)
ESC MCUSTM32F051
ESC continuous current35Amps
ESC burst current45AmpsBurst operation.
ESC mounting holes20*20mm,M2
ESC targetGEPRC-BL32-4IN1
VTX input voltage5V
VTX channels48
VTX transmission power0mW(Pit mode) / 25mW / 100mW / 200mW / 400mW/ 500mW0mW in Pit mode.
Remote control exampleFrsky X9d or similarSuggested equipment for flight.
Goggle exampleFatShak V2 or similarSuggested equipment for flight.
Battery4S 850mAhRecommended battery configuration.
Package contents1 x CineStyle 4K F722 quadcopter; 10 pairs of GEP-3042 props; 3 battery straps; 1 Momoda RHCP SMA antenna for receiving signalsIncluded equipment.
CameraCaddx Tarsier 4K 1200TVL
ESC configuration and battery cell rangeBLheli_32 2-6S 4in1
Video parameter adjustmentVideo recording parameters adjustable by Wi-Fi/app
Camera viewVideo view excludes propellers and propeller protection frames