Product overview
The GEPRC CineLog35 V3 WTFPV is a cinematic FPV flight platform built around the GEP-CL35 V3 frame, with a 142mm wheelbase and 3.5mm main carbon plate. Its guarded propulsion system pairs SPEEDX2 2105.5 2650KV motors with HQProp D-T90MM tri-blade propellers. A bottom-mounted camera arrangement uses damping balls to reduce frame vibration. The frame accommodates O4 Air Unit Pro integration while preserving access to its Type-C connection and memory card, and mounting provisions support action cameras, including GoPro installations.
The supplied WTFPV configuration has no VTX, camera or antenna, so O4 Pro recording capability depends on adding that equipment. This is a flight platform with control electronics and propulsion, rather than an airframe-only kit. Buyers can select PNP or ELRS 2.4G, each with or without GPS. The ELRS version weighs 245g ± 2g. Recommended power is a LiPo 6S 1100mAh–1300mAh battery; the stated 7min-8min30s duration applies to smooth cruising and varies with flight style. Accessories include propellers, battery retention parts, tools, spares and camera mounts.
Specifications
| Specification | Value & conditions |
|---|---|
| Model | GEPRC Cinelog35 V3 WTFPV |
| Options | PNP, ELRS 2.4G, PNP With GPS, ELRS 2.4G With GPS |
| Frame | GEP-CL35 V3 |
| Main carbon plate thickness | 3.5mm |
| Wheelbase | 142mm |
| FC system | GEP-F722-45A AIO V2 |
| MCU | STM32F722RET6 |
| Gyro | ICM42688-P |
| FC firmware | GEPRC_F722_AIO |
| Flash | 16MB |
| ESC | 8Bit 45A |
| Motor | SPEEDX2 2105.5 2650KV |
| Propellers | HQProp D-T90MM |
| Power connector | XT60EW-M |
| VTX | None |
| Camera | None |
| Antenna | None |
| Receiver | PNP (O4 Pro built-in receiver) / ELRS 2.4GPNP / ELRS 2.4G configurations. |
| Weight | 245g ± 2gELRS 2.4G version. |
| Recommended battery | LiPo 6S 1100mAh–1300mAh |
| Flight time | 7min-8min30sTested with smooth cruising; actual flight time depends on flight style. |
| Video integration | Supports O4 Air Unit Pro integration and 4K 120fps video recording.With O4 Air Unit Pro integration. |
| Camera mounting architecture | Bottom-mounted camera installation with vibration-reducing damping balls. |
| Propeller guard material | High-toughness modified material. |
| Integration access | Frame shaped for O4 Air Unit Pro installation, with Type-C cable and memory card access.For O4 Air Unit Pro installation. |
| Action camera accommodation | Action camera mounting provision; supports sports cameras or direct O4 Pro recording. |
| Included equipment | 1 × CineLog35 V3; 2 × HQProp D-T90mm ×3 propellers (pairs); 1 × 20*220mm battery strap; 1 × 20*250mm battery strap; 2 × battery anti-slip pads (pairs); 1 × spare screw pack; 1 × each 1.5mm, 2mm and 3mm L-shaped hex wrench; 1 × M5 wrench; 1 × damping ball perforator; 1 × keychain; 1 × Type-C data cable; 1 × action camera mount; 1 × naked GoPro mount.Supplied configuration. |
| Spare pack contents | 4 × M2*7 screws; 2 × M2*8 screws; 4 × M2*6 screws; 4 × M2*5 screws; 2 × M2 nuts; 2 × camera damping balls; 2 × brass press-fit nuts; 2 × M2*16 screws; 2 × M2*4 screws with washers; 4 × M2*5.5 screws with washers; 1 × M5 flange nut; 1 × M5*28 screw.Included spare screw pack. |
Request a quote for GEPRC CineLog35 V3 WTFPV
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.