Product overview
The GEPRC CineLog35 V2 HD O3 is supplied as an equipped FPV flight platform for cinematic filming, freestyle and leisure flying indoors and outdoors. Its GEP-CL35 V2 frame has a 142mm wheelbase, a 2.0mm gimbal plate, a 3.5mm top plate and a 1.5mm bottom plate. Carbon structure and an injection protection frame are reinforced with 7075 aluminum columns. The O3 camera sits on an independent underslung shock-absorbing gimbal designed to address camera IMU resonance.
The integration layout combines a GEP-F722-45A AIO V2 flight controller, 8Bit 45A ESC, O3 Air Unit and O3 camera. The protective frame provides access to the O3 memory card and USB connection, while the XT60E1-M power plug is integrated with the carbon plate. Battery retention uses a tie and 7075 aluminum fixing parts. Supplied GP and Naked GP camera mounting bases provide additional camera mounting provisions, alongside an antenna mounting base and antenna fixing tubes.
Procurement choices comprise PNP, ELRS 2.4G and TBS Nano RX versions, each offered with or without GPS; the GPS specification is GEP-M10. The current propulsion configuration uses SPEEDX2 2105.5-2650KV (6S) motors and HQProp D-T90MM propellers. Recommended battery capacity is LiPo 1050mah-1300mah, and flight time is 5′00″–8′30″. The 285.8g weight applies specifically to the TBSNanoRX configuration. The package includes the drone, propellers, battery straps and pads, mounting hardware, screws and hand tools.
Specifications
| Specification | Value & conditions |
|---|---|
| Model | GEPRC CineLog35 V2 HD O3 |
| Frame | GEP-CL35 V2 |
| Wheelbase | 142mm |
| Gimbal plate | 2.0mm |
| Top plate | 3.5mm |
| Bottom plate | 1.5mm |
| Flight controller system | GEP-F722-45A AIO V2 |
| MCU | STM32F722RET6 |
| Gyroscope | ICM 42688-P |
| OSD | Betaflight OSD w/AT7456E chip |
| ESC | 8Bit 45A |
| Video transmitter | O3 Air Unit |
| Camera | O3 |
| Antenna | 5.8G&2.4G |
| Motor | SPEEDX2 2105.5-2650KV (6S)6S. |
| Propeller | HQProp D-T90MM |
| GPS | GEP-M10With GPS configuration. |
| Weight | 285.8gCineLog35 V2 HD O3 TBSNanoRX configuration. |
| Receiver configurations | PNP, GEPRC ELRS 2.4G, TBS Nano RX |
| Recommended battery | LiPo 1050mah-1300mah |
| Flight time | 5′00″ -8′ 30″ |
| Configuration options | PNP, ELRS 2.4G, TBS Nano RX, PNP With GPS, ELRS 2.4G With GPS, TBS Nano RX With GPS |
| Product purpose | 3.5-inch HD FPV drone for cinematic filming, freestyle and leisure flying indoors and outdoors. |
| Structural architecture | Main carbon plate and injection protection frame reinforced with 7075 aluminum columns. |
| Battery retention | Battery secured by a tie with 7075 aluminum fixing parts. |
| Power connector integration | XT60E1-M power plug integrated with the carbon plate. |
| O3 data access | Protective frame provides memory-card and USB access for the O3 Air Unit. |
| Camera suspension | Independent underslung shock-absorbing camera gimbal designed to address camera IMU resonance.O3 camera. |
| Supplied flight platform and mounting accessories | 1 x Cinelog35 V2 HD O3; 2 x HQProp D-T90MM (2 pairs); 2 x M20*250mm battery straps; 2 x battery silicone pads.Included equipment. |
| Supplied tools and integration hardware | Screw set; 1.5mm, 2mm and 3mm L-shaped screwdrivers; M5 wrench; plastic tweezers; one pair of antenna fixing tubes; keychain; GP camera mounting base; Naked GP camera mounting base; antenna mounting base.Included equipment. |
Request a quote for GEPRC CineLog35 V2 HD O3
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.