Product overview
The GEPRC CineLog35 V2 Analog is a 3.5-inch FPV aircraft for cinematic filming, freestyle and leisure flying indoors and outdoors. Its GEP-CL35 V2 frame combines a 142mm wheelbase with a carbon main plate, an injection protection frame and reinforcing 7075 aluminum columns. The gimbal, top and bottom plates measure 2.0mm, 3.5mm and 1.5mm respectively. Battery attachment uses a tie secured with 7075 aluminum parts, and the XT60E1-M power connector is integrated with the carbon plate. Supplied GP and naked GP camera mounting bases provide camera attachment provisions.
The flight platform combines a GEP-F722-45A AIO V2 controller, an 8Bit 45A ESC, SPEEDX2 2105.5-2650KV motors specified for 6S and HQProp D-T90MM propellers. Analog video equipment consists of a Caddx Ratel2 camera, GEPRC RAD 1W(UFL) transmitter and GEPRC Peano 5.8 RHCP UFL antenna. Controller electronics include an STM32F722RET6 MCU, ICM 42688-P gyro and Betaflight OSD with an AT7456E chip. PNP, ELRS 2.4G and TBS Nano RX configurations are offered, each with a GPS option; GPS-equipped configurations use the GEP-M10.
The TBSNanoRX configuration weighs 263.8g. Recommended battery capacity is LiPo 1050mah-1300mah, and the specified flight-time range is 5′00″ -8′ 30″. Delivery includes one CineLog35 V2 Analog aircraft, HQProp D-T90MM propellers listed as two pairs, two M20*250mm battery straps and two silicone battery pads. The accessory package also contains camera and antenna mounting bases, an antenna fixed tube pair, fasteners, camera-gimbal damping rubber, three sizes of L-shaped screwdriver, an M5 wrench, plastic tweezers and a keychain. Receiver and GPS selection determine the ordered aircraft configuration.
Specifications
| Specification | Value & conditions |
|---|---|
| Model | GEPRC CineLog35 V2 Analog |
| Purpose | 3.5-inch cinematic FPV drone for filming, freestyle and leisure flying indoors and outdoors. |
| Frame | GEP-CL35 V2 |
| Wheelbase | 142mm |
| Gimbal plate | 2.0mm |
| Top plate | 3.5mm |
| Bottom plate | 1.5mm |
| Flight controller system | GEP-F722-45A AIO V2 |
| MCU | STM32F722RET6 |
| Gyroscope | ICM 42688-P |
| OSD | Betaflight OSD w/AT7456E chip |
| ESC | 8Bit 45A |
| Video transmitter | GEPRC RAD 1W(UFL) |
| FPV camera | Caddx Ratel2 |
| Antenna | GEPRC Peano 5.8 RHCP UFL |
| Motor | SPEEDX2 2105.5-2650KV (6S)6S configuration. |
| Propeller | HQProp D-T90MM |
| GPS | GEP-M10With GPS configuration. |
| Weight | 263.8gCineLog35 V2 Analog TBSNanoRX configuration. |
| Receiver configurations | PNP, GEPRC ELRS2.4G, TBS Nano RX |
| Recommended battery | LiPo 1050mah-1300mah |
| Flight time | 5′00″ -8′ 30″ |
| Configuration options | PNP, ELRS 2.4G, TBS Nano RX, PNP With GPS, ELRS 2.4G With GPS, TBS Nano RX With GPS |
| Structural architecture | Carbon main plate and injection protection frame reinforced with 7075 aluminum columns. |
| Battery attachment and power connection | Battery tie secured with 7075 aluminum parts; XT60E1-M power plug integrated with the carbon plate. |
| Included aircraft and accessories | 1 CineLog35 V2 Analog aircraft; 2 x HQProp D-T90MM (2 pairs); 2 M20*250mm battery straps; 2 battery silicone pads; screw set; 1.5mm, 2mm and 3mm L-shaped screwdrivers; M5 wrench; plastic tweezers; antenna fixed tube pair; keychain; GP camera mounting base; naked GP camera mounting base; antenna mounting base.Supplied package. |
| Included fasteners and damping parts | 2 M2*18 cup-head screws; 2 M2*5.5 round-head screws with pads; 1 M2*12 round-head screw; 2 M2 rivet nuts; 4 each M2*8, M2*7 and M2*6 round-head screws; 2 M2.5*6 round-head screws; 2 M1.6*8 hexagonal screws; 1 M5 flange nut; 2 brass-color M2*1.9-OD4.9 press rivet nuts; two entries of 2 M2 iron nuts each; 2 camera-gimbal shock-absorbing rubber pieces.Supplied screw package. |
Request a quote for GEPRC CineLog35 V2 Analog
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.