Product overview
The GEPRC CineLog35 Performance Analog is a powered FPV quadcopter for cinematic recording, freestyle, racing and cruising, with an integrated guard arrangement intended for indoor and outdoor flying. Its GEP-CL35 Performance frame has a 142mm wheelbase and 3.5-inch propeller guards with hollowed-out sections for weight and noise reduction. Plate thicknesses are 2.5mm at the top, 2.0mm at the bottom and 3.5mm at the arms. The reversed-motor layout pairs SPEEDX2 2105.5-2650KV motors with HQ DT90-3 propellers.
Control electronics comprise the GEP-F722-45A AIO system, an STM32F722 processor, a six-axis IMU and a BLheli_S 45A ESC. BetaFlight OSD uses an AT7456E chip. The analog FPV installation combines a Caddx Ratel2 camera, RAD 5.8G 1.6W video transmitter and GEPRC Momoda MMCX RHCP antenna in the 195mm long version. Recording-camera integration uses two supplied 3D printed mounting parts for GP cameras, Naked GP 8 and 10 cameras, Insta 360 GO2 and Caddx Peanut cameras, alongside a shock-absorbing gimbal design.
The supplied product is a flight platform with accessories, including propeller pairs, battery retention hardware, landing pads, spare printed parts, tools and a CADDX OSD menu board. Receiver choices are PNP, Frsky R-XSR, TBS Nano RX and ELRS 2.4G. Weight is 257.9g for the 6S PNP configuration. Battery specifications cover LiPo 6S 850–1300mAh or Li-HV 6S 1550mAh 60C. With a 6S 1550mAh battery, cruising duration is 5 minutes 30 seconds carrying a full-size GP 10, versus 7 minutes 30 seconds without a mounted camera.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer | GEPRC |
| Model | CineLog35 Performance Analog |
| Frame | GEP-CL35 Performance |
| Wheelbase | 142mm |
| Top plate thickness | 2.5mm |
| Bottom plate thickness | 2.0mm |
| Arm plate thickness | 3.5mm |
| Flight controller system | GEP-F722-45A AIO |
| MCU | STM32F722 |
| IMU | 6-Axis |
| On-screen display | BetaFlight OSD w/AT7456E chip |
| Electronic speed controller | BLheli_S 45A |
| Video transmitter | RAD 5.8G VTX 1.6W |
| FPV camera | Caddx Ratel2 |
| Propeller | HQ DT90-3 |
| Antenna | GEPRC Momoda 5.8g MMCX RHCP 195mm Long Version Antenna |
| Motor | SPEEDX2 2105.5-2650KV |
| Weight | 257.9gCineLog35 Performance Analog 6S PNP configuration. |
| Receiver options | PNP, Frsky R-XSR, TBS Nano RX, ELRS 2.4G |
| Battery specification | LiPo 6S 850mAh-1300mAh / Li-HV 6S 1550mAh 60C |
| Cruising flight time with camera | 5 minutes 30 seconds6S 1550MAH battery; full size GP 10 mounted; cruising flight. |
| Cruising flight time without mounted camera | 7 minutes 30 seconds6S 1550MAH battery; mounting condition stated as “None”; cruising flight. |
| Intended use | FPV quad for cinematic shooting, freestyle, racing and cruising indoors and outdoors. |
| Propeller guard architecture | 3.5-inch integrated propeller guard with a hollowed-out design for weight and noise reduction. |
| Motor arrangement | Reversed-motor design |
| Recording camera integration | Mounting provisions for GP cameras, Naked GP 8 and 10 cameras, Insta 360 GO2 and Caddx Peanut cameras.Using the two supplied 3D printed camera mounting parts. |
| Camera vibration isolation | Shock-absorbing gimbal design |
| Supplied configuration and accessories | 1 × CineLog35 Performance Analog flight platform; 2 × HQ DT90-3 propeller pairs; 1 × M15x200mm battery strap; 2 × battery silicone pads; 2 × landing pads; 1 × spare 3D printing parts item; 1 × screw set; 1 × screwdriver set; 1 × CADDX OSD menu board; 1 × antenna fixed tube. |
Request a quote for GEPRC CineLog35 Performance Analog
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.