Product overview
The GEPRC Cinelog30 V3 WTFPV Quadcopter provides a compact powered platform for cinematic FPV integration. Its GEP-CL30 V3 frame combines a 128mm wheelbase with 2.5mm carbon fiber plates, aluminum reinforcement and a wrap-around electronics compartment. Dust-proof plugs protect the data ports, while a front canopy provides camera impact protection. An underslung gimbal mount is designed around the O4 Air Unit PRO, but this WTFPV configuration specifies no video transmitter, camera or antenna; these imaging components require separate provision.
Flight electronics comprise a TAKER F722 45A 32Bit AIO with an STM32F722RET6 MCU, ICM 42688-P gyro and 16MB flash. SPEEDX2 1404 3850KV motors drive HQprop DT76mmx3 V2 propellers. The rear power distribution board supports organized wiring and includes receiver, buzzer, LED BEC, TVS and anti-spark features. Receiver choices are PNP, ELRS 2.4G and TBS Nano RX. The PNP receiver description refers to a digital VTX’s built-in receiver, although the supplied configuration lists no VTX.
The package supplies a Cinelog30 V3 flight platform with propulsion and control electronics, plus a transparent-black protective frame, two propeller pairs, grey and black canopies, battery mounting accessories, tools and spare hardware. The TBS NanoRX version weighs 148±2g. Power connects through XT30, with LiHV 4S 660mAh-720mAh batteries recommended; a battery is absent from the inclusion list. The stated flight time is 8 minutes 10 seconds at slow cruising speeds, with actual duration varying by flying method.
Specifications
| Specification | Value & conditions |
|---|---|
| Model | GEPRC Cinelog30 V3 WTFPV Quadcopter |
| Options | PNP, ELRS 2.4G, TBS Nano RX |
| Frame model | GEP-CL30 V3 |
| Carbon fiber plate thickness | 2.5mm |
| Wheelbase | 128mm |
| Flight system | TAKER F722 45A 32Bit AIO |
| MCU | STM32F722RET6 |
| Gyro | ICM 42688-P |
| Flight controller firmware | GEPRC_F722_AIO |
| Flash | 16MB |
| ESC | 32Bit 45A |
| Motor | SPEEDX2 1404 3850KV |
| Propeller | HQprop DT76mmx3 V2 |
| Battery connector | XT30 |
| Video transmitter | None |
| Camera | None |
| Antenna | None |
| Receiver configurations | PNP (digital built-in VTX receiver) / ELRS2.4G / TBS NanoRX |
| Weight | 148±2gTBS NanoRX version. |
| Recommended battery | LiHV 4S 660mAh-720mAh |
| Flight time | 8’10″Tested at slow cruising speeds; actual times may vary with flying method. |
| Protective architecture | Aluminum-reinforced frame, wrap-around electronics compartment, dust-proof data-port plugs and protective camera canopy. |
| Power distribution board | Custom PDB with receiver, buzzer, LED BEC, TVS and anti-spark features. |
| Imaging integration | Cinelog series underslung gimbal mount.For the O4 Air Unit PRO. |
| Supplied configuration and accessories | 1 × Cinelog30 V3; 1 × transparent-black protective frame; 2 × HQprop DT76mmx3 V2 propeller pairs; 1 × 15*150mm battery strap; 1 × 1.5mm L-shaped screwdriver; 1 × grey canopy; 1 × black canopy; 1 × spare screw pack; 1 × battery anti-slip pad; 1 × damping ball puncher; 1 × frequency pairing ejector pin. |
| Spare pack contents | 1 × M2 rivet nut; 4 × M2*4.5 button-head hex socket screws; 4 × M2*6 button-head hex socket screws; 4 × M2*4 button-head hex socket screws; 1 × M2*12 button-head screw; 2 × damping balls.Included spare screw pack. |
Request a quote for GEPRC Cinelog30 V3 WTFPV Quadcopter
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.