Product overview
The GEPRC Cinelog30 V2 HD O3 Quadcopter is a 3-inch FPV flight platform for cinematic recording and recreational flying. Its GEP-CL30 V2 frame has a 124mm wheelbase and 2.5mm carbon plate, combining an integrated protective structure with a shock-absorbing gimbal for the O3 camera. Propulsion pairs SPEEDX2 1404 3850KV motors with HQprop DT76mmx3 V2 propellers. The TAKER F722 45A 32Bit AIO flight system uses an STM32F722RET6 processor, ICM 42688-P gyroscope and 16MB flash, with GEPRC_F722_AIO firmware and a 32Bit 45A ESC.
The imaging equipment comprises an O3 AIR Unit, O3 camera and original O3 antenna. Camera integration also supports Naked GoPro, Action2 and Insta360 cameras, and the supplied accessories include a Naked GoPro mount. A rear USB port enables parameter adjustments, while the O3-compatible memory-card slot and USB arrangement facilitate card removal. A CNC aluminum part and strap retain the battery. Receiver configurations are PNP with a digital built-in receiver, ELRS 2.4G or TBS Nano RX; the 182.8g weight applies specifically to the TBS NanoRX version.
The recommended battery is LiHV 4S 660mAh-720mAh, with an XT30 connector. Flight time ranges from 6 minutes to 8 minutes 30 seconds during low-speed cruising and varies with flying style. Take-off weight is 249g with a LiPo 4S 720mAh battery. The supplied quadcopter comes with a propeller pack, two 15*150mm battery straps, two anti-slip pads, a 1.5mm L-shaped screwdriver, a damping ball puncher, a pairing ejector pin and spare hardware. The spare pack includes three screw sizes, a swage nut and two O3 damping balls.
Specifications
| Specification | Value & conditions |
|---|---|
| Model | GEPRC Cinelog30 V2 HD O3 Quadcopter |
| Purpose | 3-inch FPV drone for cinematic shots and recreational flying |
| Frame | GEP-CL30 V2 |
| Carbon Plate Thickness | 2.5mm |
| Wheelbase | 124mm |
| Flight System | TAKER F722 45A 32Bit AIO |
| MCU | STM32F722RET6 |
| Gyroscope | ICM 42688-P |
| FC Firmware | GEPRC_F722_AIO |
| Flash | 16MB |
| ESC | 32Bit 45A |
| Motor | SPEEDX2 1404 3850KV |
| Propeller | HQprop DT76mmx3 V2 |
| Battery Connector | XT30 |
| VTX | O3 AIR Unit |
| Camera | O3 |
| Antenna | O3 original |
| Options and Receiver | PNP (digital built-in receiver) / ELRS 2.4G / TBS Nano RX |
| Weight | 182.8gTBS NanoRX version. |
| Recommended Battery | LiHV 4S 660mAh-720mAh |
| Flight Time | 6′- 8’30”Low-speed cruising; actual time varies with flying style. |
| Take-off Weight | 249gLiPo 4S 720mAh battery fitted. |
| Frame Construction | Lightweight, rigid integrated frame |
| Camera Isolation | Shock-absorbing gimbal for the O3 camera |
| Additional Camera Integration | Compatible with Naked GoPro, Action2 and Insta360 cameras |
| USB and Memory Card Access | Rear USB port for parameter adjustment; O3-compatible memory card slot with access for card removal |
| Battery Retention | CNC aluminum part and strap secure the battery |
| Supplied Configuration and Accessories | Flight platform: 1 × Cinelog30 V2 Quadcopter; 1 × HQprop DT76mmx3 V2 propeller pack; 2 × 15*150mm battery straps; 1 × 1.5mm L-shaped screwdriver; 1 × spare screw pack; 2 × battery anti-slip pads; 1 × damping ball puncher; 1 × frequency pairing ejector pin; 1 × Naked GoPro mount |
| Spare Pack Contents | 4 × M2*5mm pan-head screws; 1 × swage nut; 4 × M2*4mm pan-head screws; 4 × 1.6*10mm screws; 2 × O3 damping ballsIncluded spare screw pack. |
| Protective Frame and Noise | Low-noise operation; protective frame reduces injury risk during impacts |
Request a quote for GEPRC Cinelog30 V2 HD O3 Quadcopter
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.