Product overview
The GEPRC CineLog30 HD w/ Runcam Link Wasp Digital HD System is a 3-inch FPV pusher quadcopter for freestyle and cinematic flying. Its carbon-material GEP-CL30 frame combines a compact, reversed-motor layout with 126mm motor-to-motor spacing. The top and bottom plates are each 2.0mm thick, and the arm plate is 3.0mm. GR1404 3850KV motors drive HQProp T76MMX3 propellers. A shock-absorbing mounting base accommodates a naked GP8 or INSTA 360 GO2 recording camera alongside the Runcam Link Wasp FPV camera.
The supplied flight platform integrates a GEP-F411-35A AIO flight controller, STM32F411 MCU, 6-axis gyro, BLheli_S 35A ESC and VISTA video transmitter. Configuration choices comprise PNP with DJI receiver, Frsky R-XSR, TBS Nano RX, ELRS 2.4G and RTF. The quadcopter package includes a battery strap, two propeller pairs, guards, EVA damping rings and landing pads, battery silicone pads, antenna tube and screws, plus PNP-specific TBS receiver mounts. The RTF option adds a DJI V1 Mode2 controller, DJI Goggle V2, two 4s 90C 660mah batteries and an ISDT 608AC charger.
The PNP configuration weighs 165.4g without a battery. With a 4S 660mAh battery and naked GP8, the sub250g configuration has a specified flight duration of 6–8 minutes. Battery-equipped take-off weight is given as both 204 grams and 222.5 grams with a 4s 660mah battery; the 204-gram description also gives an approximate duration of 7.5 minutes. Camera integration uses the dedicated mounting base for the named GP8 and INSTA 360 GO2 options, while receiver selection and the additional operating equipment depend on the chosen package.
Specifications
| Specification | Value & conditions |
|---|---|
| Product | GEPRC CineLog30 HD Runcam Link Wasp |
| Purpose and architecture | 3-inch FPV pusher quadcopter for freestyle and cinematic flying |
| Frame | GEP-CL30 |
| Motor-to-motor distance | 126mm |
| Top plate thickness | 2.0mm |
| Bottom plate thickness | 2.0mm |
| Arm plate thickness | 3.0mm |
| Flight controller | GEP-F411-35A AIO FC |
| MCU | STM32F411 |
| Gyro | 6-Axis |
| OSD | BetaFlight OSD w/AT7456E chip |
| ESC | BLheli_S 35A |
| Video transmitter | VISTA |
| FPV camera | Runcam Link Wasp |
| Propeller | HQProp T76MMX3 |
| Antenna | GEPRC Momoda 5.8G Antenna Long Version LHCP UFL |
| Motor | GR1404 3850KV |
| Weight | 165.4gCineLog30 PNP without battery. |
| Receiver configurations | PNP(DJI receiver) / Frsky R-XSR / TBS Nano RX |
| Options | PNP (DJI Receiver), Frsky R-XSR, TBS Nano RX, ELRS 2.4G, RTF |
| Battery and flight duration | GEPRC 4S 660maH; 6-8minWith naked camera GP8, sub250g configuration, using a 4S 660mAh battery. |
| Take-off weight and approximate flight duration | 204 grams; around 7.5 minutesEquipped with 4s 660mah battery. |
| Additional take-off weight figure | 222.5 gramsWith 4s 660mah battery. |
| Propeller revision | June 6th, 2022: T3x3x3 replaced by HQProp T76MMX3 |
| Camera revision | November 30th, 2022: CADDX Polar replaced by Runcam Link WaspCineLog30 HD version. |
| Frame construction and motor layout | Carbon-material GEP-CL30 frame with a compact, reversed-motor layout |
| Camera integration | Mounting base accommodates naked camera GP8 and INSTA 360 GO2Using the camera mounting base. |
| Camera mount isolation | Backward-push design with a shock-absorbing camera mount |
| Supplied quadcopter and accessories | 1 CineLog30 HD Runcam Link Wasp quadcopter; 1 battery strap, 20x200mm; 2 pairs T76MMX3 propellers; 2 propeller guards; 2 EVA guard damping rings; 2 EVA landing pads; 2 battery silicone pads; 1 antenna tube; 1 screw package; 1 TBS receiver mount (PNP); 1 TBS receiver antenna mount (PNP)TBS receiver mount and TBS receiver antenna mount supplied for PNP. |
| RTF equipment | DJI Remote controller V1 (Mode2); DJI Goggle V2; 2 × 4s 90C 660mah batteries; ISDT 608AC chargerRTF option. |
Request a quote for GEPRC CineLog30 HD w/ Runcam Link Wasp Digital HD System
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.