Product overview
The CineLog25 combines a GEP-CL25 frame with a 109mm wheelbase, an ultra-light carbon plate and EVA cushioning around the frame. Its pusher arrangement carries GR1404 4500kv upgraded motors and GEMFAN D63-3 propellers. Flight electronics comprise the F411-35A AIO controller, STM32F411 MCU, six-axis gyro, BetaFlight OSD with AT7456E chip and BLheli_S 20A ESC. The HD video equipment pairs a Caddx Vista transmitter with the Runcam Link Wasp camera and a GEPRC Momoda 5.8G long-version LHCP UFL antenna measuring 85mm.
Recording-camera integration supports SMO 4K, GP6 lite and GP8 Lite cameras, with a supplied GP Lite camera TPU seat. Camera angle adjustment spans 0-40 degrees, while three, four or five damping rings allow adjustment for the flight state. GP6 and GP8 connections provide camera power and wiring for remote on/off control. The aircraft supports DJI HD Goggles. Recommended power is a 4S 450-750mAh battery, including the specified GEPRC 4S 660mAh 90/180C HV 3.8V/4.35V LiPo option; flight time is around 5.5 minutes, depending on flying habits.
GEPRC supplies the CineLog25 assembled and debugged, with PNP, Frsky RXSR, TBS Nano RX and ELRS 2.4G configuration choices. The package contains one CineLog HD quadcopter, four pairs of D63-3 propellers, the camera seat, two EVA pads, two battery non-slip mats, two battery straps and a screwdriver. The CineLog25 HD PRO weight is 145.5g without a battery. A separate 281 g weight is also listed without a configuration qualification. The included-equipment list does not specify a battery or recording camera.
Specifications
| Specification | Value & conditions |
|---|---|
| Product | GEPRC CineLog25 HD Runcam Link Wasp CineWhoop Drone |
| Frame | GEP-CL25 |
| Wheelbase | 109mm |
| Flight controller | F411-35A AIO |
| MCU | STM32F411 |
| Gyro | 6-Axis |
| OSD | BetaFlight OSD w/ AT7456E chip |
| ESC | BLheli_S 20A |
| Video transmitter | Caddx Vista |
| FPV camera | Runcam Link Wasp |
| Propellers | GEMFAN D63-3 |
| Motors | GR1404 4500kv (Upgraded Version) |
| Antenna | GEPRC Momoda 5.8G Antenna Long Version LHCP UFL(85mm) |
| CineLog25 HD PRO weight | 145.5gWithout battery. |
| Additional listed weight | 281 g |
| Battery | 4S 450-750mAh or GEPRC 4S 660mAh 90/180C HV 3.8V/4.35V LiPo BatteryRecommended battery configuration. |
| Configuration options | PNP, Frsky RXSR, TBS Nano RX, ELRS 2.4G |
| Flight time | Around 5.5 minutesDepends on flying habits. |
| Physical architecture | Pusher quadcopter frame incorporating an ultra-light carbon plate |
| Frame cushioning | EVA protective foam cushioning around the frame |
| Camera damping adjustment | Three, four or five damping ringsDamping selection according to flight state. |
| Recording-camera compatibility | SMO 4K, GP6 lite and GP8 Lite cameras |
| Goggle integration | DJI HD Goggles with Runcam Link Wasp camera |
| Camera angle adjustment | 0-40 degrees |
| Camera power and recording connections | Camera power cable output and video recording wire; camera on/off control via remote controllerGP6 and GP8 cameras. |
| Assembly | Assembled and debugged by GEPRC |
| Aircraft and spare propellers | 1x CineLog HD Quadcopter; 4x D63-3 Props(Pairs)Included equipment. |
| Camera mount | 1x GP Lite camera 3D TPU SeatIncluded equipment. |
| Pads and battery retention | 2x EVA Pad; 2x Battery non-slip mat; 2x BatterystrapIncluded equipment. |
| Tool | 1x screwdriverIncluded equipment. |
Request a quote for GEPRC CineLog25 HD Runcam Link Wasp
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.