Product overview
The GEPRC CineLog20 HD O3 is a compact flight platform for filming in complex indoor spaces and narrow passages. Its 2 inch pusher layout uses the GEP-CL20 frame with a 100mm wheelbase, a 2.0mm gimbal plate, a 2.5mm top plate and a 1.5mm bottom plate. A shock-absorbing camera mounting arrangement is intended to reduce image jello. The integrated O3 AIR Unit and O3 Camera support 4K 120fps recording without adding a separate recording camera.
The current flight controller system is the TAKER G4 35A AIO, introduced in the April 19, 2024 configuration change. Propulsion combines specified GR1303.5 5500KV motors with EMAX Avan Micro 2×2.4×4 propellers. Receiver configurations include PNP with a built-in DJI receiver, ELRS 2.4G, TBS Nano RX and Frsky R-XSR. The TBS Nano RX configuration weighs 140g. Recommended power is a LiHv 4S 450mah-660mah battery, and the flight-time specification is 4-6min.
Camera integration centers on a one-piece injection-molded mount for GEPRC naked GP 8/9/10/11 cameras, Action2, insta360 Go2, Peanut and other small, light action cameras. The package supplies a CineLog20 HD O3 aircraft, two pairs of 2 inch propellers, a Naked GP Camera Base and a 4S camera power cable with balanced terminal head. Battery straps, silicone pads, EVA landing pads, guard damping rings, antenna mounting parts, fasteners and a 1.5mm L-shaped screwdriver complete the supplied equipment.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer and model | GEPRC CineLog20 HD O3 |
| Architecture and purpose | 2 inch pusher Cinewhoop for filming in complex, narrow environments. |
| Frame | GEP-CL20 |
| Wheelbase | 100mm |
| Gimbal plate | 2.0mm |
| Top plate | 2.5mm |
| Bottom plate | 1.5mm |
| Current flight controller system | TAKER G4 35A AIO; replaced GEP-F411-35A AIO on April 19, 2024. |
| MCU | STM32F411CEU6 |
| Gyro | ICM 42688-P |
| OSD | Betaflight OSD w/AT7456E chip |
| ESC | 8Bit 35A |
| Video transmitter | O3 AIR Unit |
| Camera | O3 Camera |
| Antenna | 5.8G&2.4G |
| Motor | GR1303.5 5500KV |
| Propeller | EMAX Avan Micro 2×2.4×4 |
| Weight | 140gCineLog20 HD O3 with TBS Nano RX. |
| Receiver configurations | PNP (built-in DJI receiver), ELRS2.4G, TBS Nano RX / RXSR |
| Options | PNP, Frsky R-XSR, TBS Nano RX, ELRS 2.4G |
| Recommended battery | LiHv 4S 450mah-660mah |
| Flight time | 4-6min |
| Video recording | 4K 120fpsO3 AIR Unit version; without an additional mounted camera. |
| Action-camera integration | Mount accommodates GEPRC naked GP 8/9/10/11 cameras, Action2, insta360 Go2, Peanut and other light, small action cameras.Using the one-piece injection-molded camera mount. |
| Camera vibration isolation | Shock-absorbing gimbal beneath the independent FPV camera, intended to reduce image jello. |
| Aircraft and primary accessories | 1 × CineLog20 HD O3 flight platform; 2 pairs of 2 inch propellers; 1 × Naked GP Camera Base; 2 × M15*150mm battery straps; 2 × battery silicone pads; 2 × EVA landing pads.Supplied configuration. |
| Tools, power cable and mounting accessories | 1 screw set; 1 × 1.5mm L-shaped screwdriver; 1 antenna fixing tube; 1 × 4S Naked GP Camera power cable with balanced terminal head; 2 EVA guard damping rings; 1 vertical and 1 horizontal TBS antenna mount; 1 TBS antenna printed part.Supplied configuration. |
| Fasteners | 3 × M2*12mm cup-head screws; 2 × M2*5mm round-head screws; 1 × M2*8mm round-head screw with pad; 3 × M2*7mm round-head screws; 2 × M2*8mm round-head screws; 2 × M2 iron nuts; 1 self-clinching nut.Included screw package. |
Request a quote for GEPRC CineLog20 HD O3
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.