Product overview
The GEPRC CineLog20 Analog is a compact filming platform built around a 2 inch pusher layout for complex indoor spaces and narrow flight paths. Its GEP-CL20 frame has a 100mm wheelbase, with a 2.0mm gimbal plate, 2.5mm top plate and 1.5mm bottom plate. A shock-absorbing gimbal beneath the independent FPV camera is intended to reduce image jello in the goggles. The TBS Nano RX configuration weighs 116g, so that weight applies specifically to that receiver configuration.
The analog video equipment comprises a Caddx Ratel2 camera, RAD Mini 1W VTX and GEPRC Peano 5.8G RHCP MMCX antenna. Flight electronics include the Taker G4 35A AIO, ICM 42688-P gyro, Betaflight OSD with AT7456E chip and 8Bit 35A ESC. GR1303.5 5500KV motors drive EMAX Avan Micro 2×2.4×4 propellers. Battery selection is specified as LiHv 4S 450mAh-660mAh, with a stated flight time of 4-6min. The PNP configuration requires a receiver because none is included in that option.
Camera integration uses a one-piece injection-molded mount for light action cameras, including GEPRC naked GP 8/9/10/11, Action2, insta360 Go2 and Peanut. The supplied product is a flight platform with installed propulsion and analog FPV equipment. Its accessory package includes two pairs of 2 inch propellers, a Naked GP camera base, battery straps and pads, landing pads, guard damping rings, antenna mounting parts, fasteners and a 1.5mm screwdriver. A 4S Naked GP camera power cable with balanced terminal head is also included.
Specifications
| Specification | Value & conditions |
|---|---|
| Model | GEPRC CineLog20 Analog |
| Options | PNP, Frsky R-XSR, TBS Nano RX, ELRS 2.4G |
| VTX revision | February 20, 2024: GEPRC 5.8G@600mw replaced by RAD Mini 1W VTX. |
| Flight controller revision | April 19, 2024: GEP-F411-35A AIO replaced by TAKER G4 35A AIO. |
| Frame | GEP-CL20 |
| Wheelbase | 100mm |
| Gimbal plate | 2.0mm |
| Top plate | 2.5mm |
| Bottom plate | 1.5mm |
| FC system | Taker G4 35A AIO |
| MCU | STM32F411CEU6 |
| Gyro | ICM 42688-P |
| OSD | Betaflight OSD w/AT7456E chip |
| ESC | 8Bit 35A |
| VTX | RAD Mini 1W VTX |
| Camera | Caddx Ratel2 |
| Antenna | GEPRC Peano 5.8G RHCP MMCX |
| Motor | GR1303.5 5500KV |
| Propeller | EMAX Avan Micro 2×2.4×4 |
| Weight | 116gCineLog20 Analog with TBS Nano RX. |
| Receiver | PNP (without receiver), ELRS2.4G, TBS Nano RXPNP configuration has no receiver. |
| Recommended battery | LiHv 4S 450mAh-660mAh |
| Flight time | 4-6min |
| Purpose and architecture | Lightweight 2 inch pusher cinewhoop for filming in complex, narrow environments. |
| FPV camera vibration isolation | Shock-absorbing gimbal beneath the independent FPV camera, intended to reduce jello in the goggles image. |
| Action camera mounting | One-piece injection-molded mount supports GEPRC naked GP 8/9/10/11, Action2, insta360 Go2, Peanut and other light, small action cameras.For light and small action cameras. |
| Included aircraft and accessories | 1 × CineLog20 Analog; 2 pairs of 2 inch propellers; 1 × Naked GP Camera Base; 2 × M15*150mm battery straps; 2 × Battery Silicone Pads; 2 × EVA landing Pads; 1 × screw set; 1 × 1.5mm L-shaped screwdriver; 1 × antenna fixed tube; 1 × 4S Naked GP Camera power cable with balanced terminal head; 2 × EVA guard damping rings; 1 × vertical TBS antenna mount; 1 × horizontal TBS antenna mount; 1 × TBS antenna printed parts.Supplied configuration. |
| Fasteners | 3 × M2*12mm cup head screws; 2 × M2*5mm round head screws; 1 × M2*8mm round head screw with pad; 3 × M2*7mm round head screws; 2 × M2*8mm round head screws; 2 × M2 iron nuts; 1 × self-clinching nut.Included screw package. |
Request a quote for GEPRC CineLog20 Analog
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.