Product overview
The GEPRC CineKing 4K RunCam Hybrid is a supplied quadcopter intended primarily for indoor filming, with obstacle flying and competition also among its uses. Its GEP-CK2 frame has a 95mm wheelbase, guarded 2inch propellers and GR1105 5000KV motors. The RunCam Hybrid combines HD recording up to 4K@30fps with analog FPV imaging, using separate SONY 8MP and 1.3MP sensors. Camera framing keeps the propellers and guards out of the video. The fully soft-mounted flight controller provides a clean operating environment for the gyroscope.
The STABLE F411 electronics combine a flight controller, 12A four-in-one ESC and 5.8G video transmitter, with 16mm mounting patterns and component footprints from 21mm*21mm to 17mm*27mm. Receiver options include PNP, which requires a separately provided SBUS receiver. Recommended batteries are 3-4S 450-550mAh; the 4s aircraft weighs 99g without a battery. The camera accepts DC 5-20V but must not connect directly to a 4s battery or above because surges can burn it. MicroSD capacity reaches 128G with FAT32 formatting; U3 is recommended, U3 or above is required for 2.7K60/1080P120, and other recording modes require U1 or above.
Specifications
| Specification | Value & conditions |
|---|---|
| Supplied configuration | One CineKing 4K RunCam Hybrid quadcopter. |
| Purpose | Primarily intended for indoor filming; additional uses include aerial photography, obstacle flying and competition. |
| Weight and dimensions | Weight: 150 g; dimensions: 300 × 200 × 100 mm. |
| Aircraft weight | 99g4s version; without battery. |
| Receiver options | PNP(Without Receiver), Frsky XM+, Frsky R-XSR, TBS Crossfire Nano RX, Flysky FS-A8S V2PNP configuration is supplied without a receiver. |
| Receiver requirement | Requires a separately provided SBUS receiver.PNP configuration. |
| Frame and installed equipment | GEP-CK2 frame; 95mm wheelbase; STABLE F411 SYSTEM flight electronics; RunCam Hybrid 4K camera; 2inch propellers. |
| Motors and recommended battery | GR1105 5000KV motors; recommended battery: 3-4S 450-550mAh. |
| Gyroscope revision | 6-Axis gyroscope; replaced MPU6000(SPI) in May 2022. |
| Dual camera system and sensors | HD and analog FPV imaging; SONY 8MP HD sensor and SONY 1.3MP analog sensor. |
| Camera field of view | HD recording FOV: 145°; FPV FOV: 150° @ 4:3.FPV field of view measured at 4:3. |
| HD video recording | 4K@30fps / 2.7K@60fps / 2.7K@50fps / 1080P@120fps / 1080P@100fps / 1080P@60fps / 1080P@50fps |
| Television modes, interfaces and lenses | Switchable NTSC (720*480)/PAL (720*576); HD UART remote control; analog FPV UART firmware updates; M10 HD lens and M8 FPV lens. |
| Camera power input | DC 5-20VDo not power the camera directly from a 4s battery or above; direct battery power generates surges that can burn the camera. |
| Camera working current | 480mA @5V / 140mA @12VCamera operation at 5V or 12V, respectively. |
| MicroSD support | Up to 128GU3 recommended; 2.7K60/1080P120 requires U3 or above; other recording modes require U1 or above. FAT32 formatting is required to avoid errors. |
| Flight controller MCU and OSD | STM32F411 MCU; BetaFlight OSD with AT7456E chip.STABLE F411 flight controller. |
| Flight controller power, dimensions and firmware | BEC output: 5V@2A; size: 21mm*21mm; mounting holes: 16mm*16mm; integrated LC filter; input voltage: 2-4S LIPO; firmware target: MATEKF411.STABLE F411 flight controller. |
| ESC MCU and continuous current | BB21F16G MCU; continuous current: 12A.STABLE F411 BLheli_S 4IN1 ESC. |
| ESC input and protocols | Input voltage: 2-4S LIPO; ESC protocols: pwm, oneshot125, multishot, dshot150, 300, 600, etc.STABLE F411 BLheli_S 4IN1 ESC. |
| ESC dimensions, firmware and current meter |
|
| Video transmitter frequency and power | 5.8G; power settings: PIT/25/100/200mW.STABLE F411 video transmitter. |
| Video transmitter interfaces and dimensions | IPEX (UFL) antenna interface; IRC Tramp telemetry; size: 17mm*27mm; mounting holes: 16*16mm; integrated LC filter.STABLE F411 video transmitter. |
| Flight controller mounting | Fully soft-mounted flight controller intended to provide a clean operating environment for the gyroscope. |
| Propeller protection and camera framing | Propeller guards fitted; camera framing excludes the propellers and guards. |
Request a quote for CineKing 4K RunCam Hybrid
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.