ChinaDrone.Request a quote ↗
COMMERCIAL AIRCRAFT

GEPRC CineEye HD

By GEPRC ↗

The GEPRC CineEye HD is an indoor micro FPV quadcopter combining a 79mm frame, 1.6-inch propellers and a Caddx baby turtle V2 recording camera. Supplied as an equipped flight platform with receiver options, it weighs 50g without battery. Weak wind resistance and almost four minutes of smooth-flight endurance define practical operating limits.

Request a quote ↗
GEPRC CineEye HD drone with a yellow canopy, front camera and white propeller guards
GEPRC CineEye HD drone with a yellow canopy, front camera and white propeller guards
Flight timeAlmost 4minsSmooth flight.
Dimensions300 × 200 × 100 mm
Weight, additional information150 g
Receiver optionsPNP(Without Receiver), Frsky XM+, DSMX(R720X), TBS Crossfire Nano RX, Flysky FS-A8S V2, AC900(Futaba S-FHSS)
Flight controller and ESCGEP-12A-F4 (BLheli_S)
Frame and wheelbaseFrame: GEP-CE1.6; wheelbase: 79mm

Product overview

The GEPRC CineEye HD is a powered micro quadcopter for indoor FPV flying and onboard video recording. Its GEP-CE1.6 frame has a 79mm wheelbase, with GR1102 10000KV motors driving 1.6-inch propellers. Protective structures surround the aircraft’s electronics, while the viewing arrangement keeps propellers and guards out of the camera image. The aircraft weighs 50g without a battery and has weak wind resistance, making that limitation material to its indoor role. Flight duration is almost four minutes under smooth-flight conditions.

The supplied flight platform integrates a GEP-12A-F4 flight controller and ESC, Caddx baby turtle V2 camera, and 5.8G video transmitter with selectable PIT/25/100/200mW output. Integration provisions include 25.5mm × 25.5mm mounting holes, a 5V@2A BEC and an IPEX/UFL antenna interface. Receiver choices include a PNP configuration without a receiver. The package includes the drone, propellers and four spare canopies. A battery is excluded; the battery descriptions differ between a 300mAh 4.35V high-voltage lithium battery in the power combination and a 300mAh 3S battery in the aircraft specifications.

Specifications

SpecificationValue & conditions
Weight, additional information150 g
Dimensions300 × 200 × 100 mm
Receiver optionsPNP(Without Receiver), Frsky XM+, DSMX(R720X), TBS Crossfire Nano RX, Flysky FS-A8S V2, AC900(Futaba S-FHSS)
Flight controller and ESCGEP-12A-F4 (BLheli_S)
Frame and wheelbaseFrame: GEP-CE1.6; wheelbase: 79mm
Motors and propeller sizeMotors: GR1102 10000KV; propeller: 1.6 inch
Video transmitter5.8g 200mW
CameraCaddx baby turtle V2
Aircraft weight50gWithout battery.
Flight timeAlmost 4minsSmooth flight.
Receiver specificationFrsky XM+ / Frsky R9mm / TBS Nano RX / Flysky A8SV2
Sensor and horizontal resolutionImage sensor: 1/2.7″ CMOS sensor; horizontal resolution: 800TVLCaddx baby turtle V2 camera.
Video resolution1080P@60fps / 1080P@30fps / 720@60fpsCaddx baby turtle V2 camera.
Camera power input and working currentPower input: DC 4.5-20V; working current: 380mA@5V/160mA@12V (low consumption)Caddx baby turtle V2 camera; working current at 5V and 12V respectively.
Field of viewFPV FOV: 155°; recording FOV: 170°Caddx baby turtle V2 camera.
Minimum illumination0.01luxCaddx baby turtle V2 camera.
Image resolution and lensImage resolution: 2 Megapixels; lens: 1.8mm Turbo Eye LensCaddx baby turtle V2 camera.
Video file formatMP4Caddx baby turtle V2 camera.
Electronic shutterPAL: 1/50-100,000; NTSC: 1/60-100,100Caddx baby turtle V2 camera; PAL and NTSC respectively.
Signal-to-noise ratioGreater than 60dBCaddx baby turtle V2 camera; AGC OFF.
MicroSD support8-64GBCaddx baby turtle V2 camera; requires Class 10 or above; Class 10/UHS-I/UHS-II recommended.
Processor and inertial sensorMCU: STM32F411; IMU: MPU6000 gyro/accelerometer (SPI)GEP-12A-F4 system.
On-screen displayBetaFlight OSD w/ AT7456E chipGEP-12A-F4 system.
BEC output and mounting holesBEC output: 5V@2A; mounting holes: 25.5mm*25.5mmGEP-12A-F4 system.
Flight controller firmware targetMATEKF411GEP-12A-F4 system.
ESC continuous current and protocolsContinuous current: 12A; ESC protocol: pwm, oneshot125, multishot, dshot150, 300, 600, etc.GEP-12A-F4 system.
ESC firmware target and current meterESC firmware target: Blheli_S G_H_30; current meter: 210GEP-12A-F4 system.
Video transmitter power settingsPIT/25/100/200mW
Antenna interface and antennaIPEX (UFL) // 5.8 G Antenna UFL LHCP
Supplied configuration1 x CineEye HD CineWhoop Drone; 4 x 1636 3-Blade Propellers (4 CW & 4 CCW); 4 x spare canopy (4 colors)Included equipment.
SOURCE WITH CHINADRONE

Request a quote for GEPRC CineEye HD

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.