Product overview
The Cinebot35 WTFPV is a powered quadcopter platform with flight electronics and motors, rather than an airframe-only kit. Its GEP-CT35 frame has a 167 mm wheelbase, a 3.5 mm main plate and a 1.5 mm bottom plate. The architecture combines a high-coverage electronics bay with an independent HD camera mounting unit using six-point suspended vibration damping. A dedicated action camera mount provides another imaging attachment point. The function board brings together anti-spark functionality, a buzzer, an LED BEC and a USB tuning port.
Procurement choices comprise PNP and ELRS 2.4G configurations, each also offered as WCC without the camera cage. The WTFPV configuration supplies no video transmitter, camera or antenna, so those imaging components remain an integration requirement. Included equipment covers the quadcopter, four propeller pairs, battery retention accessories, landing pads, mounting parts, damping balls, tools and fasteners. Recommended batteries span 6S 1300mAh–6S 1550mAh and connect through XT60. The ELRS 2.4G version weighs 323 g ±5 g; the stated 10–11-minute flight duration applies to slow cruising and varies with flying style.
Specifications
| Specification | Value & conditions |
|---|---|
| Configuration options | PNP, ELRS 2.4G, PNP WCC (Without Camera Cage), ELRS 2.4G WCC (Without Camera Cage) |
| Power system | TAKER H743 FC + H60 Mini ESC + 2105.5/2450KV motors |
| Model | Cinebot35 WTFPV Version |
| Frame | GEP-CT35 |
| Main plate thickness | 3.5 mm |
| Bottom plate thickness | 1.5 mm |
| Wheelbase | 167 mm |
| Flight system | TAKER H743 Flight Controller + H60 Mini ESC |
| MCU | STM32H743 |
| Gyroscope | ICM42688-P (SPI) |
| Flight controller firmware | GEPRC_TAKER_H743MINI |
| Flash memory | 16 MB |
| ESC | H60 Mini 32-bit |
| Motor | SPEEDX2 2105.5 / 2450KV |
| Propeller | HQProp D-T90MM ×3 |
| Battery connector | XT60 |
| Receiver | PNP (O4 Pro built-in RX) / ELRS 2.4GPNP or ELRS 2.4G configuration. |
| Weight | 323 g ±5 gELRS 2.4G version. |
| GPS | GEP-M10Q |
| Recommended battery | 6S 1300mAh – 6S 1550mAh |
| Flight time | 10–11 minutesSlow cruising flight; actual flight time may vary depending on flying style. |
| Video transmitter | NoneWTFPV version. |
| Camera | NoneWTFPV version. |
| Antenna | NoneWTFPV version. |
| Intended use | Professional cinematic shooting and daily freestyle flying |
| HD camera mounting architecture | Independent HD camera unit with six-point suspended vibration damping |
| Electronics enclosure | Frame structure with a high-coverage electronics bay |
| Function board | Dedicated function board with anti-spark function, buzzer, LED BEC and USB tuning port |
| Action camera mounting | Dedicated action camera mount included |
| Supplied equipment and spares | 1 × Cinebot35 quadcopter; 4 × HQProp D-T90MM pairs; 1 × 15*150mm battery strap; 1 × L-shaped 1.5mm hex wrench; 1 × spare screw pack; 1 × anti-slip battery pad; 1 × binding plug; 4 × rear landing pads; 2 × front bottom landing pads; 1 × front top cover; 2 × O4 antenna mounts; 2 × acrylic plates; 3 × damping balls. Spare screw kit: 2 × rivet nuts; 4 × M2*4, 3 × M2*10, 4 × M2*7 and 3 × M2*6 button head hex screws; 2 × M2*10 socket head screws. Selected-version accessories: 1 × receiver connector cable (WTFPV PNP); separate entries of 6 × and 5 × M2*4 button head screws (WTFPV).Receiver connector cable supplied with WTFPV PNP; additional button-head screws supplied with selected WTFPV versions. |
Request a quote for GEPRC Cinebot35 WTFPV Quadcopter
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.