Product overview
The GEPRC Cinebot35 O4 Pro is a quadcopter flight platform for cinematic shooting and everyday freestyle flying. Its GEP-CT35 frame combines a 167 mm wheelbase with a 3.5 mm main plate and 1.5 mm bottom plate. An independent HD camera unit uses six-point suspended vibration damping, while a front canopy protects the DJI O4 Air Unit Pro. The structure incorporates a high-coverage electronics bay and a dedicated action camera mount, providing separate mounting provisions for the onboard imaging system and an additional camera.
The installed flight system pairs a TAKER H743 controller with an H60 Mini 32-bit ESC and SPEEDX2 2105.5 / 2450KV motors. Imaging and video transmission use the DJI O4 Air Unit Pro camera, transmitter and antenna, alongside GEP-M10Q GPS. A dedicated function board provides anti-spark functionality, a buzzer, LED BEC and USB tuning port. Receiver choices are PNP using the O4 Pro built-in receiver, or ELRS 2.4G. The independent camera mounting arrangement also supports sharing VTX modules across different models.
The supplied package contains the quadcopter, four pairs of HQProp D-T90MM propellers, battery retention accessories, landing pads, mounting pieces, damping balls, tools and spare fasteners. Selected O4 PNP versions additionally include a receiver connector cable. The recommended battery range is 6S 1300mAh to 6S 1550mAh, connected through XT60. Weight is 388 g ±5 g for the ELRS 2.4G version. Flight time is 10–11 minutes under slow cruising conditions; flying style can change the actual duration.
Specifications
| Specification | Value & conditions |
|---|---|
| Model | GEPRC Cinebot35 O4 Pro Version |
| Configuration options | PNP, ELRS 2.4G |
| New power system | TAKER H743 FC + H60 Mini ESC + 2105.5/2450KV Motors |
| Frame | GEP-CT35 |
| Main plate thickness | 3.5 mm |
| Bottom plate thickness | 1.5 mm |
| Wheelbase | 167 mm |
| Flight system | TAKER H743 Flight Controller + H60 Mini ESC |
| MCU | STM32H743 |
| Gyro | ICM42688-P (SPI) |
| Flight controller firmware | GEPRC_TAKER_H743MINI |
| Flash | 16 MB |
| ESC | H60 Mini 32-bit |
| Motor | SPEEDX2 2105.5 / 2450KV |
| Propeller | HQProp D-T90MM ×3 |
| Battery connector | XT60 |
| Video transmitter | DJI O4 Air Unit Pro |
| Camera | DJI O4 Air Unit Pro Camera |
| Antenna | DJI O4 Air Unit Pro Antenna |
| Receiver | PNP (O4 Pro built-in RX) / ELRS 2.4GPNP or ELRS 2.4G configuration. |
| Weight | 388 g ±5 gELRS 2.4G version. |
| GPS | GEP-M10Q |
| Recommended battery | 6S 1300mAh – 6S 1550mAh |
| Flight time | 10–11 minutesTested with slow cruising flight; actual flight time may vary depending on flying style. |
| Intended purpose | Professional cinematic shooting and daily freestyle flying. |
| Camera mounting architecture | Independent HD camera unit with six-point suspended vibration damping. |
| Electronics integration and protection | High-coverage electronics bay; dedicated function board with anti-spark, buzzer, LED BEC and USB tuning port; protective front canopy for the DJI O4 Air Unit Pro; dedicated action camera mount included. |
| Video module integration | Independent HD camera mounting system allows VTX modules to be shared across different models. |
| Supplied platform and accessories | 1 × Cinebot35 quadcopter; 4 × HQProp D-T90MM pairs; 1 × 15*150mm battery strap; 1 × L-shaped 1.5mm hex wrench; 1 × spare screw pack; 1 × anti-slip battery pad; 1 × binding plug; 4 × rear landing pads; 2 × front bottom landing pads; 1 × front top cover; 2 × O4 antenna mounts; 2 × acrylic plates; 3 × damping balls. Spare screw kit: 2 × rivet nuts; 4 × M2*4, 3 × M2*10, 4 × M2*7 and 3 × M2*6 button head hex screws; 2 × M2*10 socket head screws. |
| Version-specific accessory | 1 × receiver connector cable.Selected versions only: O4 PNP. |
Request a quote for GEPRC Cinebot35 O4 Pro Quadcopter
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.