Product overview
The GEPRC Cinebot30 HD O3 is a cinematic FPV quadcopter built around the GEP-CT30 O3 frame, with a 127mm wheelbase, carbon-fiber structure and guarded propellers. Its camera hardware uses 7075 aluminum components, while the injection-molded PC+PET guard incorporates a ring-shaped COB light. The current camera mounting revision uses a 70° silicone pad and M2*5 round head screws with pads to address jitter. The DJI O3 Air Unit fits inside the fuselage while retaining Type-C access for video retrieval. Removing six screws provides access for component upgrades or replacement.
The supplied flight platform combines a GEP-F722-45A AIO V2 controller, DJI O3 camera and video system, and HQ prop T76mm propellers. Buyers can select 4S or 6S power configurations with corresponding motor variants and recommended battery capacities. The package includes propeller pairs, two battery straps, silicone pads, hardware, tools, a Naked GP camera base and an antenna fixing tube. The four-hole top mounting arrangement supports a full-sized GP camera, with flight duration reaching 5 minutes and 30 seconds; the recommended Naked camera GP10 configuration extends this to up to 10 minutes and 30 seconds.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer and model | GEPRC Cinebot30 HD O3 Quadcopter |
| Power versions | 4S, 6S |
| Receiver options | PNP, Frsky R-XSR, TBS Nano RX, ELRS 2.4G |
| Frame | GEP-CT30 O3 |
| Wheelbase | 127mm |
| Isolation plate thickness | 2mm |
| Main plate thickness | 3mm |
| Bottom plate thickness | 1.5mm |
| Flight controller | GEP-F722-45A AIO V2 |
| MCU | STM32F722RET6 |
| IMU | ICM-42688-P |
| Video transmitter | DJI O3 Air Unit |
| Video resolution | 4K@50/60fps, 2.7K@50/60/100/120fps, 1080p@50/60/100/120fps |
| Camera | DJI O3 |
| Propeller | HQ prop T76mm |
| Antenna | DJI O3 Antenna |
| Charge connector | XT60H-M |
| Motor | SPEEDX2 1804-2450KV (6S Version) / SPEEDX2 1804-3450KV (4S Version)SPEEDX2 1804-2450KV for the 6S version; SPEEDX2 1804-3450KV for the 4S version. |
| Weight | 234.7gO3 version with TBS Nano RX; excluding battery. |
| Recommended battery | LiPo 4S 1100mAh-1300mAh (4S Version) / LiPo 6S 850mAh-1100mAh (6S Version)LiPo 4S for the 4S version; LiPo 6S for the 6S version. |
| Revised camera isolation and fasteners | 70° silicone pad replaces the printed TPU camera shock absorber; M2*5 round head screws with pads replace the fixing screws to address jitter.Cinebot30 O3 camera mounting revision dated March 2nd, 2023. |
| Purpose | Cinematic FPV drone. |
| Structural materials and propeller guards | 7075 aircraft-grade aluminum alloy camera components. |
| Guard construction and lighting | Injection-molded PC+PET propeller guard structure with an embedded ring-shaped COB light strip. |
| Video-system integration access | Internal O3 installation retains Type-C USB cable access for reading video data.O3 Air Unit installed inside the fuselage. |
| External camera mounting | Top plate accepts a four-hole camera base and supports a full-sized GP camera.Camera base secured by four screws. |
| Camera-dependent flight duration | Can reach 5 minutes and 30 seconds with a full-sized GP camera; up to 10 minutes and 30 seconds with the recommended Naked camera GP10.5 minutes and 30 seconds with a full-sized GP camera; up to 10 minutes and 30 seconds with a Naked camera GP10. |
| Video transmission parameters | Maximum bit rate 50MBPS; latency as low as 30 milliseconds; maximum transmitted image quality 1080P 60FPS. |
| Maintenance access | Six screws are removed to access parts for upgrade or replacement. |
| Included equipment | 1 Cinebot30 HD O3 Quadcopter; 2 pairs of HQProp T76MM propellers; 1 M15*200mm battery strap; 1 M15*220mm battery strap; 2 battery silicone pads; screws and screwdriver sets; 1 Naked GP camera base; 1 antenna fixing tube. Screws and screwdriver sets are each listed twice.Supplied Cinebot30 HD O3 quadcopter package. |
Request a quote for GEPRC Cinebot30 HD O3
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.