ChinaDrone.Request a quote ↗
COMMERCIAL AIRCRAFT

GEPRC Cinebot25 V2 WTFPV Quadcopter

By GEPRC ↗

The GEPRC Cinebot25 V2 WTFPV Quadcopter is a 2.5-inch FPV flight platform with propulsion, flight electronics and GEP-M10nano GPS. It uses a quick-release, vibration-damped camera module architecture, while the supplied WTFPV configuration omits the camera, video transmitter and antenna. PNP and ELRS 2.4G variants include options without the camera cage.

Request a quote ↗
GEPRC Cinebot25 V2 WTFPV quadcopter with four propeller guards and a front camera cage
GEPRC Cinebot25 V2 WTFPV quadcopter with four propeller guards and a front camera cage
Flight time5–8 minutesTested under slow cruising conditions; actual flight time depends on flying style.
ModelCinebot25 V2 WTFPV Quadcopter
Configuration optionsPNP, ELRS 2.4G, PNP WCC(Without Camera Cage), ELRS 2.4G WCC(Without Camera Cage)
FrameGEP-CT25 V2
Main carbon plate thickness2.0mm
Wheelbase123mm

Product overview

The GEPRC Cinebot25 V2 WTFPV Quadcopter is a 2.5-inch FPV flight platform supplied with motors, propellers and flight electronics. Its GEP-CT25 V2 frame has a 123mm wheelbase and a 2.0mm main carbon plate. Propulsion combines SPEEDX2 1404 4600KV motors with HQProp DT63mm×3 V2 propellers. The TAKER F722 35A 32Bit AIO flight system incorporates an STM32F722RET6 MCU, ICM42688-P gyro and 16MB flash. A high-coverage electronics bay accommodates the electronics, with a dedicated function board integrating a buzzer, LED strip BEC and USB tuning port.

The camera integration architecture uses a suspended, vibration-damped module with quick-release mounting, arranged for the DJI O4 Air Unit Pro. A protective canopy addresses the camera lens. The WTFPV configuration includes no video transmitter, camera or antenna, so these components must be provided separately for FPV operation. Configuration choices comprise PNP and ELRS 2.4G, each also offered as WCC without the camera cage. The receiver specification identifies PNP as having a built-in receiver, with ELRS 2.4G as the alternative; GEP-M10nano GPS is included in the specification.

Power connects through XT30, with a recommended LiHV 4S 750mAh–1100mAh battery. Flight time is 5–8 minutes under slow cruising conditions and depends on flying style. The ELRS 2.4G version weighs 219±5g. The supplied quadcopter comes with two propeller pairs, a battery strap and anti-slip pad, landing pads, a front top cover, O4 antenna mounts, acrylic plates and damping balls. A 1.5 mm hex wrench, binding pin and spare fasteners support assembly and maintenance. The PNP version also includes a receiver female connector cable.

Specifications

SpecificationValue & conditions
ModelCinebot25 V2 WTFPV Quadcopter
Configuration optionsPNP, ELRS 2.4G, PNP WCC(Without Camera Cage), ELRS 2.4G WCC(Without Camera Cage)
FrameGEP-CT25 V2
Main carbon plate thickness2.0mm
Wheelbase123mm
Flight systemTAKER F722 35A 32Bit AIO
MCUSTM32F722RET6
GyroICM42688-P
Flight controller firmwareGEPRC_F722_AIO
Flash16MB
ESC32Bit 35A
MotorsSPEEDX2 1404 4600KV
PropellersHQProp DT63mm×3 V2
Battery connectorXT30
ReceiverPNP (built-in receiver)/ ELRS 2.4G
Weight219±5gELRS 2.4G version.
GPSGEP-M10nano
Recommended batteryLiHV 4S 750mAh–1100mAh
Flight time5–8 minutesTested under slow cruising conditions; actual flight time depends on flying style.
Video transmitterNone
CameraNone
AntennaNone
Size and purpose2.5-inch FPV quadcopter
Camera module architectureQuick-release modular camera design with a suspended vibration-damping module arranged for the DJI O4 Air Unit Pro.
Electronics integrationHigh-coverage electronics bay and dedicated function board integrating a buzzer, LED strip BEC and USB tuning port.
Camera canopyCanopy designed to protect the DJI O4 Air Unit Pro camera lens.
Supplied equipment1 × Cinebot25 V2 quadcopter; 2 pairs × HQprop DT63mmx3 V2; 1 × 15*150 mm battery strap; 1 × 1.5 mm L-shape hex wrench; 1 × spare screw pack; 1 × battery anti-slip pad; 1 × binding pin; 4 × injection-molded rear landing pads; 2 × injection-molded front bottom landing pads; 1 × front top cover; 2 × injection-molded O4 antenna mounts; 2 × acrylic plates; 3 × damping balls.
Spare fasteners2 × press-fit nuts; 4 × M2*4 button head hex screws; 3 × M2*10 button head hex screws; 4 × M2*7 button head hex screws; 3 × M2*6 button head hex screws; 2 × M2*10 socket head hex screws; additional entries of 6 × and 5 × M2*4 button head hex screws.
Additional receiver cable1 × receiver female connector cablePNP version.
SOURCE WITH CHINADRONE

Request a quote for GEPRC Cinebot25 V2 WTFPV Quadcopter

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.