Product overview
The GEPRC Cinebot25 V2 O4 Pro Quadcopter is a 2.5-inch FPV flight platform equipped for aerial video with a DJI O4 Air Unit Pro camera and digital transmission system. Its GEP-CT25 V2 frame has a 123 mm wheelbase and a 2.0 mm main carbon plate. The O4 unit sits independently in a suspended vibration-damping module with a quick-release design for module changes. A high-coverage electronics bay provides space for the onboard electronics, while a protective canopy covers the camera lens. A dedicated function board integrates a buzzer, LED strip BEC and USB tuning port.
The flight electronics combine a TAKER F722 35A 32Bit AIO system, SPEEDX2 1404 4600KV motors and HQProp DT63mm×3 V2 propellers, with GEP-M10nano GPS onboard. Receiver configurations are PNP with a built-in receiver or ELRS 2.4G; the ELRS version weighs 219±5g. The XT30 battery connection is paired with a recommendation for LiHV 4S 750–1100mAh batteries. Flight time is 5–8 minutes under slow cruising test conditions, and actual duration depends on flying style. Supplied accessories include propeller pairs, battery retention items, landing pads, antenna mounts, damping balls and spare fasteners. The O4 Pro PNP version additionally includes a receiver female connector cable.
Specifications
| Specification | Value & conditions |
|---|---|
| Model | GEPRC Cinebot25 V2 O4 Pro Quadcopter |
| Options | PNP, ELRS 2.4G |
| Frame | GEP-CT25 V2 |
| Main carbon plate thickness | 2.0 mm |
| Wheelbase | 123 mm |
| Flight system | TAKER F722 35A 32Bit AIO |
| MCU | STM32F722RET6 |
| Gyro | ICM42688-P |
| Flight controller firmware | GEPRC_F722_AIO |
| Flash | 16 MB |
| ESC | 32-bit 35A |
| Motors | SPEEDX2 1404 4600KV |
| Propellers | HQProp DT63mm×3 V2 |
| Battery connector | XT30 |
| Video transmitter | DJI O4 Air Unit Pro |
| Camera | DJI O4 Air Unit Pro camera module |
| Antenna | DJI O4 Air Unit Pro antenna |
| Receiver | PNP (built-in receiver) / ELRS 2.4G |
| Weight | 219±5gELRS 2.4G version. |
| GPS | GEP-M10nano |
| Recommended battery | LiHV 4S 750–1100mAh |
| Flight time | 5–8 minutesTested under slow cruising conditions; actual flight time depends on flying style. |
| Product class | 2.5-inch FPV quadcopter |
| Modular transmission architecture | DJI O4 Air Unit Pro housed independently inside a suspended vibration-damping module. |
| Quick-release module | Vibration-damped, quick-release modular video transmitter design. |
| Electronics bay and camera protection | High-coverage electronics bay and a canopy protecting the DJI O4 Air Unit Pro camera lens. |
| Function board | Dedicated board integrating a buzzer, LED strip BEC and USB tuning port. |
| Supplied configuration and accessories | Flight platform: 1 × Cinebot25 V2 Quadcopter; 2 × HQprop DT63mmx3 V2 pairs; 1 × 15*150 mm battery strap; 1 × 1.5 mm L-shape hex wrench; 1 × spare screw pack; 1 × battery anti-slip pad; 1 × binding pin; 4 × injection-molded rear landing pads; 2 × injection-molded front bottom landing pads; 1 × front top cover; 2 × injection-molded O4 antenna mounts; 2 × acrylic plates; 3 × damping balls. |
| Spare screw pack contents | 2 × press-fit nuts; 4 × M2*4 button head hex screws; 3 × M2*10 button head hex screws; 4 × M2*7 button head hex screws; 3 × M2*6 button head hex screws; 2 × M2*10 socket head hex screws. |
| Version-specific supplied cable | 1 × receiver female connector cable.O4 Pro PNP version. |
Request a quote for GEPRC Cinebot25 V2 O4 Pro Quadcopter
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.